Mixed Oxide Capacitor of CuO—BaTiO 3 as a New Type CO 2 Gas Sensor
Authors:
- 1 March 1992
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 75 (3) , 613-618
Abstract
An oxide capacitor consisting of BaTiO 3 and an oxide is studied as a new type CO 2 sensor based on capacitance change. Sensitivity to CO 2 , as well as the optimum operating temperature, was strongly dependent on the particular oxide mixed with BaTiO 3 . Among the elements investigated in this study, CuO–BaTiO 3 exhibited the highest sensitivity to CO 2 . In particular, the CuO–BaTiO 3 mixed oxide at the equimolar composition is highly sensitive to CO 2 . The optimum operating temperature and frequency for CuO–BaTiO 3 are 729 K and 100 Hz, respectively, and the 80% response time to 2% CO 2 is within 25 s. The equimolar mixture of CuO and BaTiO 3 can measure the CO 2 concentration from 100 to 60 000 ppm. Carbonation of oxide seems to play a key role for the detection of CO 2 on these mixed oxide capacitors. The optimum operating temperature of these mixed oxide capacitors for CO 2 detection, therefore, correlates with the decomposition temperature of the carbonate corresponding to the oxide mixed with BaTiO 3 . The capacitance increase of CuO–BaTiO 3 upon exposure to CO 2 seems to result from the elevated height of the potential barrier at the grain boundary between CuO and BaTiO 3 . Carbonation of CuO in the element seems to bring about the elevation in the height of the potential barrier.Keywords
This publication has 15 references indexed in Scilit:
- Beta″-alumina solid electrolytes for solid state electrochemical CO2 gas sensorsSolid State Communications, 1990
- Carbon Dioxide Sensor Consisting of K 2 CO 3 ‐ Polyethylene Glycol Solution Supported on Porous Ceramics: II . Study of Mechanism by Employing Cyclic VoltammetryJournal of the Electrochemical Society, 1989
- The mixed oxide A12O3V2O5 as a semiconductor gas sensor for NO and NO2Sensors and Actuators, 1989
- Carbon Dioxide Sensor Consisting of K 2 CO 3 ‐ Polyethylene Glycol Solution Supported on Porous Ceramics: I . Measurements of Carbon Dioxide Sensing CharacteristicsJournal of the Electrochemical Society, 1989
- A new type of CO2 gas sensor comprising porous hydroxyapatite ceramicsSensors and Actuators, 1988
- Electrical Conductivity Response to Carbon Dioxide of Polyethylene Glycol‐Inorganic Salt Solutions Supported on CeramicsJournal of the Electrochemical Society, 1988
- Oxidation of carbon monoxide catalyzed by manganese-silver composite oxidesJournal of Catalysis, 1988
- Potentiometric gas sensor for carbon dioxide using solid electrolytesSolid State Ionics, 1987
- CO2 gas sensor usingβ-Al2O3 and metal carbonateJournal of Materials Science Letters, 1986
- K 2 CO 3 Solid Electrolyte as a CO 2 Probe: Decomposition Measurements of CaCO3Journal of the Electrochemical Society, 1984