Laboratory‐Scale Method for Estimating Explosive Performance from Laser‐Induced Shock Waves
- 20 May 2015
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 40 (5) , 674-681
Abstract
A new laboratory‐scale method for predicting explosive performance (e.g., detonation velocity and pressure) based on milligram quantities of material is demonstrated. This technique is based on schlieren imaging of the shock wave generated in air by the formation of a laser‐induced plasma on the surface of an energetic material residue. The shock wave from each laser ablation event is tracked for more than 100 μs using a high‐speed camera. A suite of conventional energetic materials including DNAN, TNT, HNS, TATB, NTO, PETN, RDX, HMX, and CL‐20 was used to develop calibration curves relating the characteristic shock velocity for each energetic material to several detonation parameters. A strong linear correlation between the laser‐induced shock velocity and the measured performance from full‐scale detonation testing has been observed. The Laser‐induced Air Shock from Energetic Materials (LASEM) method was validated using nitrocellulose, FOX‐7, nano‐RDX, three military formulations, and three novel high‐nitrogen explosives currently under development. This method is a potential screening tool for the development of new energetic materials and formulations prior to larger‐scale detonative testing. The main advantages are the small quantity of material required (a few milligrams or less per laser shot), the ease with which hundreds of measurements per day can be obtained, and the ability to estimate explosive performance without detonating the material (reducing cost and safety requirements).Keywords
This publication has 28 references indexed in Scilit:
- Production and Sensitivity Evaluation of Nanocrystalline RDX‐based Explosive CompositionsPropellants, Explosives, Pyrotechnics, 2011
- Increasing the Utility of the Copper Cylinder Expansion TestPropellants, Explosives, Pyrotechnics, 2010
- Characterization of a Series of Nitrogen‐Rich Molecules using Laser Induced Breakdown SpectroscopyPropellants, Explosives, Pyrotechnics, 2010
- Time-resolved dynamics of nanosecond laser-induced phase explosionJournal of Physics D: Applied Physics, 2009
- Bistetrazolylamines—synthesis and characterizationJournal of Materials Chemistry, 2008
- Nitrogen-Rich Salts of 1-Methyl-5-nitriminotetrazolate: An Auspicious Class of Thermally Stable Energetic MaterialsChemistry of Materials, 2008
- Measuring the brightness temperature of a detonation front in a porous explosiveCombustion, Explosion, and Shock Waves, 2007
- A simple method to assess detonation temperature without using any experimental data and computer codeJournal of Hazardous Materials, 2006
- Time-resolved observation of gas-dynamic discontinuities arising during excimer laser ablation and their interpretationJournal of Physics D: Applied Physics, 1995
- Observation of high-pressure blast-wave decursorsApplied Physics Letters, 1991