A Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes
Authors:
- 31 December 1999
- journal article
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 122 (2) , 229-237
Abstract
Finite element models in orthogonal cutting are presented in order to examine the influences of exit angles of the workpiece, tool rake angles, and backup materials on burr formation processes in 304 L stainless steel in particular. Based on the metal-cutting simulation procedure proposed by the authors, a series of stress and strain contours and final burr/breakout configurations are obtained. The burr formation mechanisms with respect to five different exit angles are found, and duration of the burr formation process increases with an increase of exit angle, resulting in different burr/breakout configurations. Based on the development of negative shear stress in front of the tool tip, the tool tip damage, what is called “chipping,” is investigated. Also, with fixed cutting conditions and workpiece exit geometry, the influence of the rake angle is found to be closely related to the rate of plastic work in steady-state cutting because the larger the rate of plastic work in steady-state cutting, the earlier the burr initiation commences. Furthermore, in order to effectively minimize the burr size, three cases of backup material influences on burr formation processes are examined. It is found that the burr size can be effectively minimized when the backup material supports the workpiece only up to the predefined machined surface. [S0094-4289(00)01402-X]Keywords
This publication has 10 references indexed in Scilit:
- A Study of Burr Formation Processes Using the Finite Element Method: Part IJournal of Engineering Materials and Technology, 1999
- Burr/Breakout Model Development and Experimental VerificationJournal of Engineering Materials and Technology, 1996
- Fretting Fatigue Tests1994
- Mechanics of Fretting Fatique1994
- A Study on Burr Formation MechanismJournal of Engineering Materials and Technology, 1991
- Predicting the Shear Plane Angle in Machining From Workmaterial Strain-Hardening CharacteristicsJournal of Engineering for Industry, 1982
- Deburring precision miniature partsPrecision Engineering, 1979
- Burrs produced by drilling1976
- The Formation and Properties of Machining BurrsJournal of Engineering for Industry, 1976
- A New Approach to Determination of the Shear-Plane Angle in MachiningJournal of Engineering for Industry, 1967