Experimental Investigation of Rotating Instability in an Axial Compressor with a Steady Swirl Distortion Inlet
Open Access
Abstract
In this paper, an experimental study was carried out on the rotating instability in an axial compressor subjected to inlet steady paired swirl distortion. In order to deepen the understanding of the rotating stall mechanism under inlet steady paired swirl distortion, the dynamic-wall static pressure near the rotor tip was monitored to characterize the flow in the rotor tip region at different circumferential stations. In the experiment, the dynamic characteristics of the rotor tip flow field at a stable operating point and during the process from the stable point to complete stall were measured. The results indicated that for the compressor with a 2 mm rotor tip clearance, the inlet paired swirl distortion induced rotating instability (RI) near the stall point, causing the compressor to enter stall in advance. Compared with the RI intensity of the clean inlet, the distortion with a swirling blade stagger angle (αst) of ±20° increased the RI intensity up to 69.8%, while for αst equal to ±40°, the RI intensity increased at most by 135.8%. As the rotor tip clearance increased to 3 mm, the co-rotating swirl in the paired swirl distortion inhibited the appearance of RI, while the counter-rotating part aggravated the development of RI. At the beginning, the process of the compressor rotating stall involved the alternation of short-scale disturbance and long-scale disturbance. The co-rotating swirl weakened the perturbation propagated from the counter-rotating swirl sector. Once the inhibition was no longer present, the short-scale disturbance rapidly developed into a long-scale disturbance and then entered the rotating stall.Keywords
Funding Information
- National Science and Technology Major Project (No.2017-Ⅱ-0004-0017)
This publication has 25 references indexed in Scilit:
- Compressor Performance and Operability in Swirl DistortionJournal of Turbomachinery, 2011
- Role of Tip Clearance Flow in Rotating Instabilities and Nonsynchronous VibrationsJournal of Propulsion and Power, 2010
- Large-eddy simulation analysis of mechanisms for viscous losses in a turbomachinery tip-clearance flowJournal of Fluid Mechanics, 2007
- Spike and Modal Stall-inception Patterns in a Variable-pitch Axial-flow FanTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 2004
- An Experimental and Numerical Investigation into the Mechanisms of Rotating InstabilityJournal of Turbomachinery, 2002
- Rotating Instabilities in an Axial Compressor Originating From the Fluctuating Blade Tip VortexJournal of Turbomachinery, 2000
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- Tip Leakage Flow in Axial CompressorsJournal of Turbomachinery, 1991
- Surge and Rotating Stall in Axial Flow Compressors—Part I: Theoretical Compression System ModelJournal of Engineering for Power, 1976
- Methods of Predicting the Tip Clearance Effects in Axial Flow TurbomachineryJournal of Basic Engineering, 1970