Structural performance of ambient‐cured reinforced geopolymer concrete beams with steel fibres
Authors:
- 1 October 2020
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 22 (1) , 457-475
Abstract
In the present investigation, the structural behavior of reinforced geopolymer concrete (RGPC) beams containing steel fiber has been studied. Four‐point flexural loading condition was applied in this experimental study; for testing the RGPC beams. The deflections of the RGPC were gauged at the mid‐span of the specimens. The crack patterns and failure mode of RGPC beam specimens were measured during the testing process. From these measurements, it has been observed that the steel fibers control cracking due to plastic and drying shrinkages. The length and width of cracks generally improved with the increment of steel fiber content. The findings also indicate that the flexural strength and elastic modulus of RGPC are remarkably enhanced due to the incorporation of steel fibers. Furthermore, the failure mode of RGPC is almost similar to the failure mode of conventional concrete. However, the RGPC performed better than the conventional concrete in terms of flexural strength and other mechanical properties. It has also been noticed that the increase of a/d ratio results in shifting the flexural failure mode in the mid‐span regions towards the support points. The experimental results have been compared with the relevant published literature as well as with the different standard codes.Keywords
This publication has 50 references indexed in Scilit:
- Sustainable cement production—present and futureCement and Concrete Research, 2011
- Cement industry: sustainability, challenges and perspectivesEnvironmental Chemistry Letters, 2010
- Effect of elevated temperatures on geopolymer paste, mortar and concreteCement and Concrete Research, 2010
- The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concreteConstruction and Building Materials, 2008
- Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperaturesCement and Concrete Research, 2007
- Use of waste ash from palm oil industry in concreteWaste Management, 2007
- Mechanical properties of high-strength steel fiber-reinforced concreteConstruction and Building Materials, 2004
- Industrially interesting approaches to “low-CO2” cementsCement and Concrete Research, 2004
- Properties of high-volume fly ash concrete incorporating nano-SiO2Cement and Concrete Research, 2004
- Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fractionCement and Concrete Research, 2003