The role of venturis in pulse-jet filters

Authors:

Abstract
The normal operation of a pulse-jet fabric filter involves two stages. First, the filter collects dust and the pressure drop increases according to the characteristics of the dust, the gas, and the way the filter is operated. Second, the filter is then cleaned; in the case of pulse-jets with a pulse of compressed air into the mouth of the bag. The point in the filtration cycle at which cleaning takes place is usually decided by the filter manufacturer, either at a set time, or at a given pressure drop. His choice is usually based on experience of the filter performance and the characteristics of the dust. The settings on the cleaning controls are usually adjustable and ‘fine tuning’ of the cleaning parameters is possible. The choice of optimum settings is not, however, straightforward. The designs of venturies in common use differ widely, ranging from straight tubes or no venturi at all, to complex smooth shapes designed for maximum performance. Little or no data are published on the performance of these venturis, and no published theory exists by which performance can be satisfactorily predicted. This paper highlights the problems involved in predicting the pressure drop of a pulse-jet filter, and goes on to present theories by which improved filter performance and stability may be achieved. Data are presented on the performance characteristics of six assorted venturi designs, and a detailed discussion on the selection procedure for venturis is included.

This publication has 2 references indexed in Scilit: