Modeling and Optimization of Cut Quality Responses in Plasma Jet Cutting of Aluminium Alloy EN AW-5083
Open Access
- 25 September 2021
- Vol. 14 (19) , 5559
Abstract
The plasma jet cutting process has a high potential for the machining of aluminium and its alloys. Aluminium is well known as a highly thermally conductive and sensitive material, and because of that there exist uncertainties in defining process parameters values that lead to the best possible cut quality characteristics. Due to that, comprehensive analysis of process responses as well as defining optimal cutting conditions is necessary. In this study, the effects of three main process parameters—cutting speed, arc current, and cutting height—on the cut quality responses: top kerf width, bevel angle, surface roughness Ra, Rz, and material removal rate were analyzed. Experimentations were conducted on aluminium EN AW-5083. In order to model relations between input parameters and process responses and to conduct their optimization, a novel hybrid approach of response surface methodology (RSM) combined with desirability analysis was presented. Prediction accuracy of developed responses regression models was proved by comparison between experimental and predicted data. Significance of process parameters and their interactions was checked by analysis of variance (ANOVA). Desirability analysis was found as an effective way to conduct multi-response optimization and to define optimal cutting area. Due to its simplicity, the novel presented approach was demonstrated as a useful tool to predict and optimize cut quality responses in plasma jet cutting process of aluminium alloy.Keywords
This publication has 23 references indexed in Scilit:
- Application of Grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steelThe International Journal of Advanced Manufacturing Technology, 2015
- Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approachThe International Journal of Advanced Manufacturing Technology, 2014
- Analysis and Multi-objective Optimisation of Surface Modification Phenomenon by EDM Process with Copper-Tungsten Semi-sintered P/M Composite ElectrodesAmerican Journal of Mechanical Engineering, 2014
- Experimental research of the plasma arc cutting processJournal of Applied Engineering Science, 2014
- Optimization of Process Parameters in Plasma arc Cutting of EN 31 Steel Based on MRR and Multiple Roughness Characteristics Using Grey Relational AnalysisProcedia Materials Science, 2014
- Investigation Analysis of Plasma Arc Cutting Parameters on the Unevenness Surface of Hardox-400 MaterialProcedia Engineering, 2013
- Effect of dual swirling plasma arc cutting parameters on kerf characteristicsInternational Journal of Material Forming, 2010
- Experimental study of the features of the kerf generated by a 200A high tolerance plasma arc cutting systemJournal of Materials Processing Technology, 2008
- High tolerance plasma arc cutting of commercially pure titaniumJournal of Materials Processing Technology, 2005
- A Study on the Cut Surface Quality of Mild Steel Plate by Oxygen Plasma Arc Cutting.QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 1999