2D numerical flow modeling in a macro‐rough channel
- 13 February 2009
- journal article
- research article
- Published by Wiley in International Journal for Numerical Methods in Fluids
- Vol. 61 (11) , 1227-1246
Abstract
A 2D numerical flow model, developed at the Research unit of Hydrology, Applied Hydrodynamics and Hydraulic Constructions at ULg, has been applied to flows in a macro‐rough channel. The model solves the shallow water equations (SWE) with a two length scale, depth‐integrated k‐type approach for turbulence modeling. Data for the comparison have been provided by experiments conducted at the Laboratory of Hydraulic Constructions at EPFL. In the experiments with different non‐prismatic channel configurations, namely large‐scale cavities at the side walls, three different 2D flow characteristics could be observed in cavities. With the used numerical model features, especially regarding turbulence and friction modeling, a single set of bottom and side wall roughness could be found for a large range of discharges investigated in a prismatic channel. For the macro rough configurations, the numerical model gives an excellent agreement between experimental and numerical results regarding backwater curves and flow patterns if the side wall cavities have low aspect ratios. For configurations with high aspect ratios, the head loss generated by the preservation of important recirculation gyres in the cavities is slightly underestimated. The results of the computations reveal clearly that the separation of turbulence sources in the mathematical model is of great importance. Indeed, the turbulence related to 2D transverse shear effects and the 3D turbulence, generated by bed friction, can have very different amplitude. When separating these two effects in the numerical models, most of the flow features observed experimentally can be reproduced accurately. Copyright © 2009 John Wiley & Sons, Ltd.Keywords
This publication has 10 references indexed in Scilit:
- Experimental and numerical analysis of flow instabilities in rectangular shallow basinsEnvironmental Fluid Mechanics, 2008
- Depth-integrated flow modelling taking into account bottom curvatureJournal of Hydraulic Research, 2006
- k-ε Turbulence Modeling of Density Currents Developing Two Dimensionally on a SlopeJournal of Hydraulic Engineering, 2002
- Modeling Transverse Mixing Layer in Shallow Open-Channel FlowsJournal of Hydraulic Engineering, 1998
- A depth-averaged turbulence model for the computation of free-surface flowJournal of Hydraulic Research, 1994
- Experimental Investigation of Shallow Recirculating FlowsJournal of Hydraulic Engineering, 1989
- Application of the two‐equation k‐ϵ turbulence model to a two‐dimensional, steady, free surface flow problem with separationInternational Journal for Numerical Methods in Fluids, 1985
- Flow Near Groin‐Like StructuresJournal of Hydraulic Engineering, 1983
- Predictions of Heat and Mass Transfer in Open ChannelsJournal of the Hydraulics Division, 1978
- A First Course in Turbulence1972