Performance Evaluation of Cementless Composites with Alkali-Sulfate Activator for Field Application
Open Access
- 27 November 2020
- Vol. 13 (23) , 5410
Abstract
This study analyzed the performance evaluation of alkali-activated composites (AAC) with an alkali-sulfate activator and determined the expected effects of applying AACs to actual sites. Results revealed that when the binder weight was increased by 100 kg/m3 at 7 days of age, the homogel strength of ordinary Portland cement (OPC) and AAC increased by 0.9 and 5.0 MPa, respectively. According to the analysis of the matrix microstructures at 7 days of age, calcium silicate hydrates (C–S–H, Ca1.5SiO3.5·H2O) and ettringite (Ca6Al2(SO4)3(OH)12·26H2O) were formed in AAC, which are similar hydration products as found in OPC. Furthermore, the acid resistance analysis showed that the mass change of AAC in HCl and H2SO4 solutions ranged from 36.1% to 88.0%, lower than that of OPC, indicating AAC’s superior acid resistance. Moreover, the OPC and AAC binder weight ranges satisfying the target geltime (20–50 s) were estimated as 180.1–471.1 kg/m3 and 261.2–469.9 kg/m3, respectively, and the global warming potential (GWP) according to binder weight range was 102.3–257.3 kg CO2 eq/m3 and 72.9–126.0 kg CO2 eq/m3. Therefore, by applying AAC to actual sites, GWP is expected to be 29.5 (28.8%)–131.3 (51.0%) kg CO2 eq/m3 less than that of OPC.Keywords
Funding Information
- This work was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education. (No. 2018R1D1A1B07049812)
This publication has 28 references indexed in Scilit:
- Effect of Waste Glass Addition as a Replacement for Fine Aggregate on Properties of MortarMaterials, 2020
- Influences of Chemical Composition and Fineness on the Development of Concrete Strength by Curing ConditionsMaterials, 2019
- Lightweight cement-free alkali-activated slag plaster for the structural retrofit and energy upgrading of poor quality masonry wallsCement and Concrete Composites, 2019
- Engineering Properties and Optimal Conditions of Cementless Grouting MaterialsMaterials, 2019
- Slag Substitution as a Cementing Material in Concrete: Mechanical, Physical and Environmental PropertiesMaterials, 2019
- CSA-based Portland-free binders to manufacture sustainable concretes for jointless slabs on groundConstruction and Building Materials, 2018
- Shrinkage Characteristics of Alkali-Activated Slag CementsJournal of Materials in Civil Engineering, 2015
- Alkali-activated binders: A reviewConstruction and Building Materials, 2008
- Application of a system dynamics approach for assessment and mitigation of CO2 emissions from the cement industryJournal of Environmental Management, 2006
- Role of mineral additions in reducing CO2 emissionCement and Concrete Research, 2005