Layering Optimization of the SrFe0.9Ti0.1O3−δ–Ce0.8Sm0.2O1.9 Composite Cathode
Open Access
Abstract
Cathode thickness plays a major role in establishing an active area for an oxygen reduction reaction in energy converter devices, such as solid oxide fuel cells. In this work, we prepared SrFe0.9Ti0.1O3−δ–Ce0.8Sm0.2O1.9 composite cathodes with different layers (1×, 3×, 5×, 7×, and 9× layer). The microstructural and electrochemical performance of each cell was then explored through scanning electron microscopy and electrochemical impedance spectroscopy (EIS). EIS analysis showed that the area-specific resistance (ASR) decreased from 0.65 Ωcm2 to 0.12 Ωcm2 with the increase in the number of layers from a 1× to a 7×. However, the ASR started to slightly increase at the 9× layer to 2.95 Ωcm2 due to a higher loss of electrode polarization resulting from insufficient gas diffusion and transport. Therefore, increasing the number of cathode layers could increase the performance of the cathode by enlarging the active area for the reaction up to the threshold point.Keywords
Funding Information
- Universiti Kebangsaan Malaysia (GUP-2020-080)
This publication has 29 references indexed in Scilit:
- Effects of sintering temperature on the structural and electrochemical properties of SrFe0.5Ti0.5O3‐δ perovskite cathodeInternational Journal of Applied Ceramic Technology, 2017
- Screen-printing inks for the fabrication of solid oxide fuel cell films: A reviewRenewable and Sustainable Energy Reviews, 2017
- Short review on cobalt-free cathodes for solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2017
- Influence of configuration and microstructure on performance of La2NiO4+δ intermediate-temperature solid oxide fuel cells cathodesJournal of Power Sources, 2013
- The effect of solids loading on the screen-printing and properties of nickel/scandia-stabilized-zirconia anodes for solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2013
- A novel cobalt-free cathode material for proton-conducting solid oxide fuel cellsJournal of Materials Chemistry, 2012
- La0.99Co0.4Ni0.6O3−δ–Ce0.8Gd0.2O1.95 as composite cathode for solid oxide fuel cellsJournal of Power Sources, 2011
- Strategies for Lowering Solid Oxide Fuel Cells Operating TemperatureEnergies, 2009
- Theoretical optimisation of a SOFC composite cathodeElectrochimica Acta, 2005
- Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell CathodesChemical Reviews, 2004