Design criterion for asymmetric twin-entry radial turbine for efficiency under steady and pulsating inlet conditions
Authors:
- 23 March 2018
- journal article
- review article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 233 (8) , 2246-2256
Abstract
The internal combustion engine plays an important role in energy conservation and environmental protection. An efficient way to simultaneously reduce the engine fuel consumption and the emissions (NOx) is an asymmetric twin-entry turbine turbocharging system. The asymmetric twin-entry turbine uses a volute that has two scrolls in the axial direction with different throat areas. The smaller area scroll can increase the backpressure to support the exhaust gas recirculation system for lower NOx emissions; meanwhile, the larger area scroll can decrease the backpressure to reduce the exhaust resistance for lower fuel consumption. The area ratio is dependent on the required exhaust gas recirculation rate and fuel consumption. However, there are no guidelines for how to arrange the scrolls, and whether placing the big scroll on the hub side or the shroud side can provide improved results remains unknown. In this paper, two different design types are discussed for the asymmetric turbine, one with the big scroll on the hub side, while the other is on the shroud side. Also, the unsteady computational fluid dynamics (CFD) simulation is under steady and pulsating inlet conditions. The results show that when under steady inlet conditions, the efficiency of the asymmetric turbine with the big scroll on the shroud side is nearly 1.6% higher. However, when facing pulsating inlet conditions, the efficiency of the asymmetric turbine with the big scroll on the hub side is almost 1.1% higher. The difference is due to the different mass flow storage capacities of the two scrolls under pulsating inlet conditions. The design criterion for asymmetric twin-entry turbine states that if the turbocharger is designed for a large volume exhaust manifold, it is better to place the big scroll on the shroud side. If for a small volume exhaust manifold, it is better to set the big scroll on the hub side.Keywords
This publication has 12 references indexed in Scilit:
- Asymmetric twin-scroll turbocharging in diesel engines for energy and emission improvementEnergy, 2017
- Hybrid EGR and turbocharging systems control for low NO and fuel consumption in an automotive diesel engineApplied Energy, 2016
- Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modelingApplied Energy, 2013
- Understanding the Twin Scroll Turbine: Flow SimilarityJournal of Turbomachinery, 2012
- Unsteady performance analysis of a twin-entry variable geometry turbocharger turbineEnergy, 2012
- Pulse Performance Modeling of a Twin Entry Turbocharger Turbine Under Full and Unequal AdmissionJournal of Turbomachinery, 2010
- An exhaust pressure control strategy for a diesel engineProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2004
- Evaluation of exhaust gas recirculation as a technique for reducing diesel engine NOx emissionsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2000
- Performance of Inward Radial Flow Turbines under Unsteady Flow Conditions with Full and Partial AdmissionProceedings of the Institution of Mechanical Engineers, 1970
- Performance of Inward Radial Flow Turbines under Steady Flow Conditions with Special Reference to High Pressure Ratios and Partial AdmissionProceedings of the Institution of Mechanical Engineers, 1969