Design and Study of Physical and Mechanical Properties of Concrete Based on Ferrochrome Slag and Its Mechanism Analysis
Open Access
Abstract
In this study, high-carbon ferrochrome slag powder produced by grinding was used to replace different proportions of cement, and the effect of the amount of ferrochrome slag powder on the physical and mechanical properties of ferrochrome-slag-cement composites was analyzed. Water-cooled ferrochrome slag with a particle size of 5 mm was used to completely replace coarse aggregate to prepare ferrochrome-slag-based concretes. The microstructure of ferrochrome-slag-cement composites was analyzed by X-ray diffraction, scanning electron microscopy, and thermogravimetry–differential scanning calorimetry analysis. The compressive strength, water absorption, and aggregate–slurry interface bonding properties of ferrochrome-slag-based concrete were studied. The results demonstrate that a ferrochrome slag powder amount of 15% leads to the highest performance of ferrochrome-slag-cement composite material, and the fluidity ratio of ferrochrome-slag-cement mortar is 103, higher than reference samples. Furthermore, the compressive strengths of ferrochrome slag concretes are 15.8% and 3.6% higher than conventional concrete, and the water absorption of ferrochrome slag low-carbon concrete is better than that of conventional concrete. The interface bonding structure between concrete aggregate and slurry was optimized. This research can provide a reference for studying the application of ferrochrome slag, both the feasibility of high-carbon ferrochrome slag powder as supplementary cementitious material and the application of ferrochrome slag as concrete aggregate, and it can help to achieve the purpose of saving energy and reducing carbon emissions.Keywords
Funding Information
- Natural Science Foundation of China (52168033)
This publication has 23 references indexed in Scilit:
- Performance assessment of geopolymer concrete with partial replacement of ferrochrome slag as coarse aggregateConstruction and Building Materials, 2019
- Feasibility of ferronickel slag powder for cementitious binder in concrete mixConstruction and Building Materials, 2019
- Performance assessment of ferrochrome slag as partial replacement of fine aggregate in concreteEuropean Journal of Environmental and Civil Engineering, 2018
- Effects of water cooled ferrochrome slag as fine aggregate on the properties of concreteConstruction and Building Materials, 2018
- Influence of nano metakaolin on thermo-physical, mechanical and microstructural properties of high-volume ferrochrome slag mortarConstruction and Building Materials, 2018
- Sustainable use of ferronickel slag fine aggregate and fly ash in structural concrete: Mechanical properties and leaching studyJournal of Cleaner Production, 2017
- Effect of stainless steel slag waste as a replacement for cement in mortars. Mechanical and statistical studyConstruction and Building Materials, 2017
- Use of ferrochrome ash (FCA) and lime dust in concrete preparationJournal of Cleaner Production, 2016
- Concrete with EAF steel slag as aggregate: A comprehensive technical and environmental characterisationComposites Part B: Engineering, 2016
- Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortarConstruction and Building Materials, 2014