Modeling of the Through-the-Thickness Electric Potentials of a Piezoelectric Bimorph Using the Spectral Element Method
Open Access
- 20 February 2014
- Vol. 14 (2) , 3477-3492
Abstract
An efficient spectral element (SE) with electric potential degrees of freedom (DOF) is proposed to investigate the static electromechanical responses of a piezoelectric bimorph for its actuator and sensor functions. A sublayer model based on the piecewise linear approximation for the electric potential is used to describe the nonlinear distribution of electric potential through the thickness of the piezoelectric layers. An equivalent single layer (ESL) model based on first-order shear deformation theory (FSDT) is used to describe the displacement field. The Legendre orthogonal polynomials of order 5 are used in the element interpolation functions. The validity and the capability of the present SE model for investigation of global and local responses of the piezoelectric bimorph are confirmed by comparing the present solutions with those obtained from coupled 3-D finite element (FE) analysis. It is shown that, without introducing any higher-order electric potential assumptions, the current method can accurately describe the distribution of the electric potential across the thickness even for a rather thick bimorph. It is revealed that the effect of electric potential is significant when the bimorph is used as sensor while the effect is insignificant when the bimorph is used as actuator, and therefore, the present study may provide a better understanding of the nonlinear induced electric potential for bimorph sensor and actuator.Keywords
This publication has 39 references indexed in Scilit:
- Free vibration and stability analysis of piezolaminated plates using the finite element methodSmart Materials and Structures, 2013
- Piezoelectric bimorph-based scanner in the tip-scan mode for high speed atomic force microscopeReview of Scientific Instruments, 2013
- A Self-Sensing Piezoelectric MicroCantilever Biosensor for Detection of Ultrasmall Adsorbed Masses: Theory and ExperimentsSensors, 2013
- Development of a Micro-Gripper Using Piezoelectric BimorphsSensors, 2013
- Analytical modeling and experimental verification of vibration-based piezoelectric bimorph beam with a tip-mass for power harvestingMechanical Systems and Signal Processing, 2013
- A finite element model for the static and dynamic analysis of a piezoelectric bimorphInternational Journal of Solids and Structures, 2004
- Dynamic stability analysis of finite element modeling of piezoelectric composite platesInternational Journal of Solids and Structures, 2004
- Analytical and numerical approaches to piezoelectric bimorphInternational Journal of Solids and Structures, 2003
- Exact solutions for dynamic analysis of composite plates with distributed piezoelectric layersComputers & Structures, 1998
- An Exact Three-Dimensional Solution for Simply Supported Rectangular Piezoelectric PlatesJournal of Applied Mechanics, 1996