Numerical simulation of realistic top coal caving intervals under different top coal thicknesses in longwall top coal caving working face
Authors:
Open Access
- 24 June 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-12
Abstract
In the process of longwall top coal caving, the selection of the top coal caving interval along the advancing direction of the working face has an important effect on the top coal recovery. To explore a realistic top coal caving interval of the longwall top coal caving working face, longwall top coal caving panel 8202 in the Tongxin Coal Mine is used as an example, and 30 numerical simulation models are established by using Continuum-based Distinct Element Method simulation software to study the top coal recovery with 4.0 m, 8.0 m, 12.0 m, 16.0 m, 20.0 m and 24.0 m top coal thicknesses and 0.8 m, 1.0 m, 1.2 m, 1.6 m and 2.4 m top coal caving intervals. The results show that with an increase in the top coal caving interval, the single top coal caving amount increases. The top coal recovery is the highest with a 0.8 m top coal caving interval when the thickness of the top coal is 4.0 m, and it is the highest with a 1.2 m top coal caving interval when the coal seam thickness is greater than 4.0 m. These results provide a reference for the selection of a realistic top coal caving interval in thick coal seam caving mining.Keywords
All Related Versions
Funding Information
- Chinese Natural Science Committee (No. 2018YFC0604502)
- Ph.D. Fund of Henan University of Engineering (No. DKJ2019001)
This publication has 8 references indexed in Scilit:
- Numerical Damping Calibration Study of Particle Element Method-Based Dynamic Relaxation Approach for Modeling Longwall Top-Coal CavingEnergies, 2021
- Laboratory and field validation of a LTCC recovery prediction model using relative size of the top coal blocksBulletin of Engineering Geology and the Environment, 2020
- Longwall Top Coal Caving Mechanisms in the Fractured Thick Coal SeamInternational Journal of Geomechanics, 2020
- Top Coal Movement Law of Dynamic Group Caving Method in LTCC with an Inclined SeamMining, Metallurgy & Exploration, 2020
- Drawing mechanism of fractured top coal in longwall top coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2020
- Theoretical description of drawing body shape in an inclined seam with longwall top coal caving miningInternational Journal of Coal Science & Technology, 2019
- CDEM-based analysis of the 3D initiation and propagation of hydrofracturing cracks in heterogeneous glutenitesJournal of Natural Gas Science and Engineering, 2016
- Arch structure effect of the coal gangue flow of the fully mechanized caving in special thick coal seam and its impact on the loss of top coalInternational Journal of Mining Science and Technology, 2016