Inferences of Baking Time on Hydrogen Embrittlement for High Strength Steel Treated with Various Zinc Based Electroplating
Authors:
- 5 January 2021
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1016, 156-161
Abstract
The hydrogen embrittlement of SK85 high-strength steel sheets was evaluated using a three-point bending test. The effect of electroplating the metal with zinc-based coatings on hydrogen embrittlement was examined by baking treatment of differently electroplated steel specimens. After electroplating, all the specimens underwent hydrogen embrittlement, promoted by hydrogen incorporation into the metal frame, owing to the reduction of hydrogen ions during electroplating. The hydrogen embrittlement of both zinc-and zinc-SiO2-electroplated SK85 steel continued after baking for 24 hours at 473 K, but that of zinc-nickel-and zinc-nickel-SiO2-electroplated SK85 steel ceased. Furthermore, TDA revealed that the trapped hydrogen could be released from steel at approximately 473 K. However, after baking, hydrogen embrittlement did not completely disappear, and we suggest that the formation of hydrogen vacancy clusters also accounts for this fracture phenomenon. The hydrogen incorporated into steel during electroplating led to the formation of hydrogen vacancy clusters, which allowed the formation of embrittlement. However, zinc and zinc-SiO2 films were not permeable enough to release these voids; while the peculiar zinc–nickel and zinc-nickel-SiO2 film structure enabled the hydrogen vacancy clusters to diffuse from the substrate.Keywords
This publication has 8 references indexed in Scilit:
- Hydrogen Embrittlement for High Strength Steel Treated with Zinc and Zinc-Nickel Alloy Electroplating from a Sulfate Bath and Hydrogen PermeabilityJournal of The Surface Finishing Society of Japan, 2019
- Evaluation of Hydrogen Embrittlement for High Strength Steel by Three-Point Bending Test and Application to Zinc ElectroplatingJournal of the Japan Institute of Metals and Materials, 2016
- Hydrogen embrittlement phenomena and mechanismsCorrosion Reviews, 2012
- Some Consequences of Hydrogen-induced Superabundant Vacancy Formation in Metals (III)^|^#x301C;Implication for Hydrogen Embrittlement^|^#x301C;Materia Japan, 2012
- Mechanism of Hydrogen-related Failure IICorrosion Engineering, 2007
- An HVEM study of hydrogen effects on the deformation and fracture of nickelActa Metallurgica, 1986
- adIndustrial & Engineering Chemistry, 1960
- XXX. The lowering of fracture-stress due to surface adsorptionPhilosophical Magazine, 1956