Tsunami-Induced Bore Propagating over a Canal—Part 1: Laboratory Experiments and Numerical Validation
Open Access
Abstract
This companion paper investigates the hydrodynamics of turbulent bores that propagate on a horizontal plane and have a striking resemblance to dam break waves and tsunami-like hydraulic bores. The focus of this paper is on the propagation of a turbulent bore over a mitigation canal using both laboratory experiments and numerical simulations. In the first part of this paper, the effects of canal depth on the time histories of wave height and velocity were experimentally investigated, and the experimental results were used for the validation of the numerical model. The rapid release of water from an impoundment reservoir at depths of do = 0.30 m and 0.40 m generated bores analogous to tsunami-induced inundations. The time histories of the wave heights and velocities were measured at 0.2 m upstream and at 0.2 m and 0.58 m downstream of the canal to study the energy dissipation effect of the mitigation canal. The recorded time series of the water surface levels and velocities were compared with simulation outputs, and good agreement was found between the experimental and numerical water surface profiles, with a Root Mean Square Error (RMSE) of less than 6.7% and a relative error of less than 8.4%. Three turbulence models, including the standard k-ε, Realizable k-ε, and RNG k-ε, were tested, and it was found that all these models performed well, with the standard k-ε model providing the highest accuracy. The velocity contour plots of the mitigation canal with different depths showed jet streams of different sizes in the shallow, medium-depth, and deep canals. The energy dissipation and air bubble entrainment of the bore as it plunged downward into the canal increased as the canal depth increased, and the jet stream of the maximum bore velocity decreased as the canal depth increased. It was found that the eye of the vortex created by the bore in the canal moved in the downstream direction and plunged downward in the middle of the canal, where it then began to separate into two smaller vortices.Keywords
Funding Information
- Discovery (NSERC) Grants
This publication has 50 references indexed in Scilit:
- SENSITIVITY ANALYSIS OF SHORE-PARALLEL CANAL FOR TSUNAMI WAVE ENERGY REDUCTIONJournal of Japan Society of Civil Engineers, Ser. B3 (Ocean Engineering), 2013
- Development of a compressive surface capturing formulation for modelling free‐surface flow by using the volume‐of‐fluid approachInternational Journal for Numerical Methods in Fluids, 2012
- Numerical Modeling of the Impact with Structures of Tsunami Bores Propagating on Dry and Wet Beds Using the SPH MethodInternational Journal of Protective Structures, 2012
- STUDY ON REDUCING TSUNAMI INUNDATION ENERGY BY THE MODIFICATION OF TOPOGRAPHY BASED ON LOCAL WISDOMJournal of Japan Society of Civil Engineers, Ser. B3 (Ocean Engineering), 2012
- Effect of Particle Size on the Characteristics of Sand Jets in WaterJournal of Engineering Mechanics, 2011
- Initial stage of two-dimensional dam-break waves: laboratory versus VOFJournal of Hydraulic Research, 2011
- The impact of the 26 December 2004 earthquake and tsunami on structures and infrastructureEngineering Structures, 2006
- Undular bore transition in bi-directional conservative wave dynamicsPhysica D: Nonlinear Phenomena, 2005
- Wave Breaking and the Generation of Undular Bores in an Integrable Shallow Water SystemStudies in Applied Mathematics, 2005
- Experiments to dambreak wave: Horizontal channelJournal of Hydraulic Research, 1998