Theoretical study of ground radiation tag antenna with Tunable open-slot exciter
- 15 August 2016
- journal article
- research article
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 9 (4) , 945-952
Abstract
A novel radio frequency identification tag antenna is composed of a resonant open-slot exciter and a dipole-type ground radiator. For a conjugate match to the Alien Higgs-4 chip impedance of 8−j149 Ω at 925 MHz, a quarter wavelength open-slot resonator embedded at the center of the dipole-type ground plane (130 × 18 mm2) was investigated and fabricated. Simple size adjustments and various loaded inductor of the open-slot resonator allow for easy control of the tag antenna resistance and inductive reactance, from which the chip impedance requirement can be easily obtained. The read range of the prototype antenna attached on a foam in the free space can reach more than 9 m, which has been tested for a radio frequency identification reader with 4.0-W of effective isotropic radiated power. Measurement data are in good agreement with simulation results.Keywords
This publication has 13 references indexed in Scilit:
- Research on U-shaped tuning stub RFID tag on different objectsInternational Journal of Microwave and Wireless Technologies, 2014
- Dual‐feed small‐size LTE/WWAN strip monopole antenna for tablet computer applicationsMicrowave and Optical Technology Letters, 2013
- Bandwidth enhancement of ground antenna using resonant feeding circuitElectronics Letters, 2013
- Ground radiation method using slot with coupling capacitorsElectronics Letters, 2013
- Small and Flexible Metal Mountable Passive UHF RFID Tag on High-Dielectric Polymer-Ceramic Composite SubstrateIEEE Antennas and Wireless Propagation Letters, 2012
- Multiband coplanar ground plane booster antenna technologyElectronics Letters, 2012
- High chip reactance matching for ultra-high-frequency radio frequency identification tag antenna designIET Microwaves, Antennas & Propagation, 2012
- Design of a compact UHF RFID tag antenna using an inductively coupled parasitic elementMicrowave and Optical Technology Letters, 2010
- The art of UHF RFID antenna design: impedance-matching and size-reduction techniquesIEEE Antennas and Propagation Magazine, 2008
- Antenna design for UHF RFID tags: a review and a practical applicationIEEE Transactions on Antennas and Propagation, 2005