Rapid bonding of Pyrex glass microchips
Authors:
- 16 March 2007
- journal article
- Published by Wiley in Electrophoresis
- Vol. 28 (6) , 994-1001
Abstract
A newly developed vacuum hot press system has been specially designed for the thermal bonding of glass substrates in the fabrication process of Pyrex glass microchemical chips. This system includes a vacuum chamber equipped with a high‐pressure piston cylinder and carbon plate heaters. A temperature of up to 900°C and a force of as much as 9800 N could be applied to the substrates in a vacuum atmosphere. The Pyrex substrates bonded with this system under different temperatures, pressures, and heating times were evaluated by tensile strength tests, by measurements of thickness, and by observations of the cross‐sectional shapes of the microchannels. The optimal bonding conditions of the Pyrex glass substrates were 570°C for 10 min under 4.7 N/mm2 of applied pressure. Whereas more than 16 h is required for thermal bonding with a conventional furnace, the new system could complete the whole bonding processes within just 79 min, including heating and cooling periods. Such improvements should considerably enhance the production rate of Pyrex glass microchemical chips. Whereas flat and dust‐free surfaces are required for conventional thermal bonding, especially without long and repeated heating periods, our hot press system could press a fine dust into glass substrates so that even the areas around the dust were bonded. Using this capability, we were able to successfully integrate Pt/Ti thin film electrodes into a Pyrex glass microchip.Keywords
This publication has 38 references indexed in Scilit:
- AC electroosmotic micromixer for chemical processing in a microchannelLab on a Chip, 2006
- Fabrication and characterization of 20 nm planar nanofluidic channels by glass–glass and glass–silicon bondingLab on a Chip, 2005
- Glass microchip with three-dimensional microchannel network for 2 × 2 parallel synthesisLab on a Chip, 2002
- Pile-up glass microreactorLab on a Chip, 2002
- Fabrication of plastic microchips by hot embossingLab on a Chip, 2002
- Soft Lithography in Biology and BiochemistryAnnual Review of Biomedical Engineering, 2001
- Integrated Multilayer Flow System on a MicrochipAnalytical Sciences, 2001
- Silicon–glass wafer bonding with silicon hydrophilic fusion bonding technologySensors and Actuators A: Physical, 1999
- Planar quartz chips with submicron channels for two-dimensional capillary electrophoresis applicationsJournal of Micromechanics and Microengineering, 1998
- Microchip electrophoresis with sample stackingElectrophoresis, 1995