Carrier-selective, passivated contacts for high efficiency silicon solar cells based on transparent conducting oxides

Authors:

Abstract
We describe the design, fabrication and results of passivated contacts to n-type silicon utilizing thin SiO 2 and indium tin oxide. High-temperature silicon dioxide is grown on both surfaces on an n-type Si wafer to a thickness <;50 Å, followed by deposition of tin-doped indium oxide (ITO) and a patterned metal contacting layer. As deposited, the thin-film stack has a very high recombination parameter, J 0,contact , and a non-ohmic, high contact resistance. However, after a forming gas anneal, the passivation quality and the contact resistivity improve significantly. The contacts are characterized by measuring the recombination parameter current density of the contact (J 0,contact ) and the specific contact resistivity (ρ contact ) using a transmission line method (TLM) pattern. The best ITO/SiO 2 passivated contact in this study has J 0,contact = 93.5 fA/cm 2 and ρ contact = 11.5 mOhm-cm 2 . These values are placed in context with other passivating contacts using an analysis that determines the ultimate efficiency and the optimal area fraction for contacts for a given set of (J 0,contact , ρ contact ) values. The ITO/SiO 2 contacts are found to have a higher J 0,contact , but a similar ρ contact compared to the best reported passivated contacts.