Multi-temperature equal channel angular pressing of Mg-3 wt%Al-1 wt%Zn alloy
Authors:
- 8 July 2013
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 93 (27) , 3612-3626
Abstract
Grain refinement of magnesium alloys at temperatures below 200 °C via deformation processes is a challenging task. Equal channel angular pressing is one of the severe plastic deformation techniques which can significantly refine grain size. Refined grains consequently improve mechanical properties of magnesium alloys. In this paper, Mg-3 wt%Al-1 wt%Zn magnesium alloy was processed by different multi-temperature equal channel angular pressing cycles without backpressure. The lowest finishing temperature of equal channel angular pressing was 150 °C leading to fine-grained microstructure with sporadically large elongated grains. Shear bands were observed after equal channel angular pressing finishing at temperatures of 175 and 150 °C. Electron backscattered diffraction revealed that grain boundary distribution is qualitatively the same for all equal channel angular pressing cycles. Crystallographic analyses of large elongated grains showed that {0 0 0 1} and { } planes in these grains tend to be aligned parallel to the shear plane. Microtexture measurements showed split of (0 0 0 2) poles. The shape of stress–strain curves and consequently yields tensile strength of Mg-3 wt%Al-1 wt%Zn alloy after multi-temperature equal channel angular pressing was influenced by final texture and twinning.Keywords
This publication has 27 references indexed in Scilit:
- An experimental and numerical study of texture change and twinning-induced hardening during tensile deformation of an AZ31 magnesium alloy rolled plateMaterials Science and Engineering: A, 2013
- Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloyActa Materialia, 2010
- Fragmentation of large grains in AZ31 magnesium alloy during ECAE via route AMaterials Science and Engineering: A, 2010
- Processing of a magnesium alloy by equal-channel angular pressing using a back-pressureMaterials Science and Engineering: A, 2009
- Strain localisation patterns under equal-channel angular pressingJournal of the Mechanics and Physics of Solids, 2008
- Ideal orientations and persistence characteristics of hexagonal close packed crystals in simple shearActa Materialia, 2007
- Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rollingActa Materialia, 2006
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31BInternational Journal of Plasticity, 2005
- Influence of grain size on the compressive deformation of wrought Mg–3Al–1ZnActa Materialia, 2004