A Pre-Measurement Device for Contour Measurement Path Planning of Complex Small Workpieces
Open Access
- 18 November 2025
- Vol. 12 (11) , 1140
Abstract
Small overall dimensions, intricate geometries, and discontinuous local surface normals characterize complex small workpieces. These features impose stringent requirements on the alignment accuracy of the workpieces when using a profilometer for three-dimensional surface measurement. This paper presents a pre-measurement method based on a reverse projection algorithm. By capturing shadow contours from multiple viewing angles, the three-dimensional pointcloud of the workpiece can be reconstructed. The reconstructed pointcloud is then used to analyze the workpiece pose and guide the path planning of a point-scanning profilometer. Experimental results show that, for a standard sphere with a radius of 12,703 mm, the measured results of the proposed measurement device achieve a fitted radius deviation of 1.8 μm when measuring 70% of the area of the spherical surface. This accuracy meets the precision requirement for guiding the path planning of the profilometer. Furthermore, the measured results from the device are employed to correct the scanning path of a five-axis profilometer for complex workpieces, such as cross-cylinder workpieces, without the need for manual pose adjustment or high-precision fixtures.Keywords
Funding Information
- National Program of China (J0017-2326-QT)
- National Natural Science Foundation of China (62373274, 52405508)
This publication has 21 references indexed in Scilit:
- Iterative line laser scanning for full profile of polyhedral freeform prismOptics & Laser Technology, 2024
- Automated line scan profilometer based on the surface recognition methodOptics and Lasers in Engineering, 2024
- Complete topographic measurement of the monolithic multi-surface workpiece on a cylindrical cavityOptics & Laser Technology, 2023
- Optical metrology for digital manufacturing: a reviewThe International Journal of Advanced Manufacturing Technology, 2022
- Tribological performance of hydrophobic and micro/nano triangle textured rake face of cutting toolsApplied Surface Science, 2022
- Optimal path planning for automated dimensional inspection of free-form surfacesJournal of Manufacturing Systems, 2020
- Review of surface profile measurement techniques based on optical interferometryOptics and Lasers in Engineering, 2017
- A multi-sensor approach for rapid and precise digitization of free-form surface in reverse engineeringThe International Journal of Advanced Manufacturing Technology, 2015
- 3-Dimensional profile distortion measured by stylus type surface profilometerMeasurement, 2013
- Complete 3D measurement in reverse engineering using a multi-probe systemInternational Journal of Machine Tools and Manufacture, 2005