Determination of the Fracture Toughness of Irradiated Reactor Pressure Tubes Using Curved Compact Specimens
Authors:
- 1 January 1988
- book chapter
- Published by ASTM International
- p. 419-439
Abstract
This paper describes a case in which nonstandard test configurations had to be used to assess fracture toughness, and an experimental, analytical program to support the validity of the results. Zirconium alloy pressure tubes (103 mm inside diameter, 5 mm thick) contain the primary coolant in CANDU™ reactors. Because irradiated materials lacks ductility, the pressure tube cannot be flattened to produce flat specimens to determine fracture toughness. Therefore, a method was devised for spark eroding 17-mm compact specimens from sections of pressure tubing. These specimens retained the normal in-plane dimensions of the standard compact specimens, but possessed the curvature of the tube. By comparing results from flat and curved specimens, this paper shows experimentally that flat-plate equations can be applied to both specimen types to calculate the fracture toughness parameters with little error. A simple analytical calculation estimates that the maximum curvature-induced stress should be less than 10% of the in-plane tensile stress at the crack tip.Keywords
This publication has 20 references indexed in Scilit:
- Analysis of the Pressure Tube Failure at Pickering NGS “A” Unit 2 Nuclear Systems DepartmentCanadian Metallurgical Quarterly, 1985
- The Development of Curved Fracture Toughness Specimens for Predicting Crack Growth in Candu Reactor Pressure Tubes1985
- Fracture toughness of Zr-2.5 wt% Nb pressure tubesNuclear Engineering and Design, 1984
- Stress-Intensity Factors for Internal and External Surface Cracks in Cylindrical VesselsJournal of Pressure Vessel Technology, 1982
- The inhomogeneous deformation behaviour of neutron irradiated Zircaloy-2Journal of Nuclear Materials, 1980
- PREDICTION OF FAST FRACTURE IN Zr-2.5%Nb PRESSURE TUBES USING ELASTIC-PLASTIC FRACTURE MECHANICS1980
- The effects of stress, temperature and hydrogen content on hydride-induced crack growth in Zr-2.5 Pct NbMetallurgical Transactions A, 1979
- Fracture behaviour of zirconium alloy pressure tubes for Canadian nuclear power reactorsInternational Journal of Pressure Vessels and Piping, 1978
- On the theory of fracture of curved sheetsEngineering Fracture Mechanics, 1970
- Effect of hydrogen and neutron irradiation on the failure of flawed Zircaloy-2 pressure tubesJournal of Nuclear Materials, 1969