Relationship between Silicon Percentage in Graphite Anode to Achieve High-Energy-Density Lithium-Ion Batteries
- 22 August 2024
- journal article
- review article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (35) , 45809-45820
Abstract
High-weight-percentage silicon (Si) in graphite (Gr) anodes face commercialization hurdles due to fundamental and interrelated challenges. Nevertheless, using the existing manufacturing line, the optimized Si/Gr ratio is the most efficient and valuable way to fabricate high-energy-density lithium-ion batteries (LIBs). Still, literature has not thoroughly examined the Si/Gr ratio. This study addresses this critical gap by systematically evaluating Si content (5-20 wt %) in commercial graphite. The goal is to optimize the Si/Gr ratio for exceptional specific capacity while mitigating inherent Si limitations like cyclic stability and first-cycle irreversible capacity loss. This work employs a multidirectional approach, including in situ electrochemical impedance spectroscopy for interface analysis, rate capability assessment (up to 3 C-rate), Li diffusion coefficient measurement, and thorough cyclic stability evaluation. Increasing the silicon (Si) weight percent from 10% to 15% in the Si15Gr75 composite anode resulted in significant improvements in the first lithiation and delithiation capacities by approximately 16.8% and 16.0%, respectively. The Si15Gr75 cell delivered a high initial Coulombic efficiency of roughly 82.9%, nearly equivalent to a pure graphite anode. Furthermore, the Si15Gr75 Li cell exhibited excellent cyclic stability at a current rate of 0.5 C, retaining about 60% of its capacity after 215 cycles. Additionally, full-cell testing against a commercial NMC622 cathode showcases excellent performance across various current rates (0.1-0.5 C). This study paves the way for the development of high-energy-density LIBs by providing valuable insights into the optimization of Si/Gr composite anodes for commercial viability.Keywords
Funding Information
- Anusandhan National Research Foundation (IPA/2021000048)
This publication has 56 references indexed in Scilit:
- Controlling the Potential of Affordable Quasi‐Solid Composite Gel Polymer Electrolytes for High‐Voltage Lithium‐Ion BatteriesBatteries & Supercaps, 2024
- On the Practical Applicability of the Li Metal‐Based Thermal Evaporation Prelithiation Technique on Si Anodes for Lithium Ion BatteriesAdvanced Energy Materials, 2022
- Understanding Component‐Specific Contributions and Internal Dynamics in Silicon/Graphite Blended Electrodes for High‐Energy Lithium‐Ion BatteriesBatteries & Supercaps, 2021
- The critical role of carbon in marrying silicon and graphite anodes for high‐energy lithium‐ion batteriesCarbon Energy, 2019
- Integration of Graphite and Silicon Anodes for the Commercialization of High‐Energy Lithium‐Ion BatteriesAngewandte Chemie International Edition, 2019
- Silicon‐Based Anodes for Lithium‐Ion Batteries: From Fundamentals to Practical ApplicationsSmall, 2018
- Challenges and Recent Progress in the Development of Si Anodes for Lithium‐Ion BatteryAdvanced Energy Materials, 2017
- A High‐Energy Li‐Ion Battery Using a Silicon‐Based Anode and a Nano‐Structured Layered Composite CathodeAdvanced Functional Materials, 2014
- 25th Anniversary Article: Understanding the Lithiation of Silicon and Other Alloying Anodes for Lithium‐Ion BatteriesAdvanced Materials, 2013
- A reversible graphite-lithium negative electrode for electrochemical generatorsJournal of Power Sources, 1983