Via-hole coupled oversized microstrip line and its band-pass filter application
Authors:
- 3 June 2008
- journal article
- research article
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 18 (5) , 436-444
Abstract
A simple via-hole coupled oversized microstrip line filter is proposed and demonstrated in this article. The via-hole in this case works as an inductor coupling structure whereas the oversized microstrip line resonator has a higher Q-factor than its conventional counterpart. Full-wave-based circuit models of a series of via-holes embedded in the oversized microstrip line are extracted by using our proposed numerical calibration technique combined with a commercial method-of-moments simulator. A simple 3-pole via-hole coupled oversized microstrip line filter is designed and fabricated on the basis of the extracted circuit models of via-holes. Measured results show that the demonstrated filter has a center frequency of 1.853 GHz, a bandwidth of 6.98% and an insertion loss of 1.36 dB. Measured results of the fabricated filter sample are in agreement with its simulated results, showing a good performance of the proposed scheme. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.Keywords
This publication has 8 references indexed in Scilit:
- A PCB-compatible 3-dB coupler using microstrip-to-CPW via-hole transitionsIEEE Microwave and Wireless Components Letters, 2006
- Simple design formula for parallel plate mode suppression by ground via-holes2004
- Numerical TRL calibration technique for parameter extraction of planar integrated discontinuities in a deterministic MoM algorithmIEEE Microwave and Wireless Components Letters, 2002
- Integrated microstrip and rectangular waveguide in planar formIEEE Microwave and Wireless Components Letters, 2001
- Unified equivalent-circuit model of planar discontinuities suitable for field theory-based CAD and optimization of M(H)MIC'sIEEE Transactions on Microwave Theory and Techniques, 1999
- Network equivalence of port discontinuity related to source plane in a deterministic 3-D method of momentsIEEE Microwave and Guided Wave Letters, 1998
- Grounding microstrip lines with via holesIEEE Transactions on Microwave Theory and Techniques, 1992
- Modeling via hole grounds in microstripIEEE Microwave and Guided Wave Letters, 1991