An experimental investigation on pool boiling heat transfer enhancement using Cu-Al 2 O 3 nano-composite coating
- 3 July 2018
- journal article
- research article
- Published by Taylor & Francis in Experimental Heat Transfer
- Vol. 32 (2) , 133-158
Abstract
Pool boiling heat transfer performances of Cu-Al2O3-coated copper surfaces have been studied experimentally for its potential use in heat transfer applications. In the present study, a two-step electrochemical deposition method is examined. This method provides an easy control on surface properties such as porosity and coating thickness. The deposition method is studied carefully and responsible surface morphology parameters are reported. After performing the pool boiling experiments on coated surfaces with DI water, the maximum critical heat flux of 1800 kW/m2 and heat transfer coefficient of 193 kW/m2 K, which are 68% and 260% higher than that of bare surface, respectively.Keywords
This publication has 57 references indexed in Scilit:
- Effect of Cu–Al2O3 nanocomposite coating on flow boiling performance of a microchannelApplied Thermal Engineering, 2013
- Flow boiling CHF enhancement using Al2O3 nanofluid and an Al2O3 nanoparticle deposited tubeInternational Journal of Heat and Mass Transfer, 2011
- Pool boiling heat transfer with nano-porous surfaceInternational Journal of Heat and Mass Transfer, 2010
- Nucleate boiling heat transfer enhancement for water and FC-72 on titanium oxide and silicon oxide surfacesInternational Journal of Heat and Mass Transfer, 2010
- Pool boiling characteristics of low concentration nanofluidsInternational Journal of Heat and Mass Transfer, 2010
- Augmentation of nucleate boiling heat transfer and critical heat flux using nanoparticle thin-film coatingsInternational Journal of Heat and Mass Transfer, 2010
- Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanismInternational Journal of Heat and Mass Transfer, 2009
- Effects of carbon nanotube arrays on nucleate pool boilingInternational Journal of Heat and Mass Transfer, 2007
- Enhanced boiling heat transfer from microporous surfaces: effects of a coating composition and methodInternational Journal of Heat and Mass Transfer, 1997
- The microlayer in nucleate pool boilingInternational Journal of Heat and Mass Transfer, 1969