Using a Single Toroidal Sample to Determine the Intrinsic Complex Permeability and Permittivity of Mn–Zn Ferrites
Authors:
- 17 September 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 43 (10) , 3807-3815
Abstract
Analysis of the principle of the published lumped circuit methods for determination of the intrinsic complex permeability and permittivity of the Mn-Zn ferrites reveals that as long as the electric and the magnetic field distributions in the core(s) in two measurements are different, the two intrinsic values can be determined. Using this principle, we developed a set of general lumped circuit methods based on a toroidal Mn-Zn ferrite core as the measurement sample. We examined two possible different excitation modes: magnetic field excitation and electric field excitation. The two different excitation modes result in significantly different field distributions in the sample. Thus, high accuracy can be guaranteed in principle. For the magnetic field excitation, we present in this paper a general finite-difference method to solve the fields in the core and the impedance of the ferrite core inductor. To avoid the stray capacitance among the coils of the ferrite core winding inductor in the measurement, we made a set of short-ended coaxial test fixtures. We performed experiments to determine the intrinsic complex permeability and permittivity of a Mn-Zn ferrite core up to 10 MHz by using the two general methods and validated the measured intrinsic values experimentally.Keywords
This publication has 15 references indexed in Scilit:
- Theoretical and Experimental Comparison of Different Lumped Circuit Methods for Determination of Mn–Zn Ferrites' Intrinsic Complex Permeability and PermittivityIEEE Transactions on Magnetics, 2008
- Experimentally Verified Mn–Zn Ferrites' Intrinsic Complex Permittivity and Permeability Tracing Technique Using Two Ferrite CapacitorsIEEE Transactions on Magnetics, 2007
- APPLICATION OF MODE MATCHING METHOD TO ANALYSIS OF AXISYMMETRIC COAXIAL DISCONTINUITY STRUCTURES USED IN PERMEABILITY AND/OR PERMITTIVITY MEASUREMENTProgress In Electromagnetics Research, 2007
- Accounting for resistivity and permittivity in high frequency permeability measurements: application to MnZn ferrites2004
- Characterization of dimensional effects in ferrite-core magnetic devices2002
- Application of the nonuniform FDTD technique to analysis of coaxial discontinuity structuresIEEE Transactions on Microwave Theory and Techniques, 2001
- Eddy-current power loss in toroidal cores with rectangular cross sectionIEEE Transactions on Magnetics, 1998
- Determination of electromagnetic properties of materials using flanged open-ended coaxial probe-full-wave analysisIEEE Transactions on Instrumentation and Measurement, 1995
- Solution of Waveguide Discontinuities by Modal AnalysisIEEE Transactions on Microwave Theory and Techniques, 1967
- Dimensional Effects Resulting from a High Dielectric Constant Found in a Ferromagnetic FerritePhysical Review B, 1950