Flexural Performance of RC Beams Strengthened with High-Strength Steel Wire Mesh and UHPC

Authors:
Open Access
Publisher website
Google Scholar
Abstract
This study proposes a strengthening technique comprising a combination of high-strength steel wire mesh and ultra-high performance concrete (UHPC) to address the challenge of the insufficient bearing capacity of existing structures. The tensile performance of high-strength wire mesh and the crack resistance of UHPC were comprehensively considered in this technique. To evaluate the influence of the steel fiber volume ratio and the high-strength steel mesh strengthening ratio on the axial tensile performance, uniaxial tensile tests were carried out on two sets of dumbbell-shaped specimens. A constitutive model of the wire mesh UHPC that matched the experimental results was established. The finite element analysis of RC beams strengthened with high-strength wire mesh and UHPC was carried out, based on this constitutive model. The experimental results indicated the following: (a) The crack resistance and ultimate strength of the specimen reinforced with the high-strength steel wire mesh were effectively enhanced, with enhancement ratios of 97.8% and 124.8%, respectively. (b) The embedded interactions between the steel wire mesh and UHPC were simulated by considering the material nonlinearity. The finite element modeling of RC beams strengthened with wire mesh UHPC was achieved. (c) Positive correlations were observed between the thickness of the UHPC layer, the steel fiber volume ratio, and the high-strength wire mesh layer with the flexural capacity of the strengthened beams. The cracking and ultimate moments were maximally enhanced by 96.2% and 99.4%, respectively.
Funding Information
  • Chongqing Municipal Education Commission (KJQN202300723, KJQN202400701, 2024-122-001)
  • Transportation Department of Guizhou Province (KJQN202300723, KJQN202400701, 2024-122-001)

This publication has 26 references indexed in Scilit: