Solid Propellant Burning Rate From Strand Burner Pressure Measurement
Authors:
- 4 April 2008
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 33 (2) , 109-117
Abstract
Strand burner pressure–time data are analyzed to determine if the propellant burning rate can be extracted. This approach is based on strand burner pressure–time history that is related to the temperature change due to exothermic reaction heating of chamber gases and gas addition to the chamber by propellant combustion products. In support of this method, chemical equilibrium calculations were made to project product composition, internal energy, and other needed properties. A mathematical model was formulated and solved numerically and the calculated burning rates were compared with the experimental wire‐break time results provided simultaneously and with the propellant manufacturer's results, when available. The comparisons reveal that the approach has merit and that more accurate pressure determination coupled with additional thermochemical information and strand burner gas temperature measurements has the potential to make this approach a viable technique and one that can be applied in conjunction with other burning rate measurements. The proposed method is similar to a well‐developed technique which is commonly applied to ballistic powders but with adjustments for the differences in geometry, pressure, and time of event.Keywords
This publication has 8 references indexed in Scilit:
- Modeling of Closed-Vessel Experiments and Ballistic Parameter EstimationJournal of Energetic Materials, 2005
- Erosive Burning of Aluminized Composite Propellants: X-ray Absorption Measurement, Correlation and Application2003
- Laser technique for determining solid propellant transient burning rates during oscillatory combustionFuel, 1998
- Measurement System for Determining Solid Propellant Burning Rate Using Transmission Microwave InterferometryJournal of Propulsion and Power, 1998
- BRLCB: A Closed-Chamber Data Analysis Program. Part 1. Theory and User's Manual1993
- An improved closed burner method1990
- An Optical System for Measuring the Burning Rate of Solid Propellant StrandsPropellants, Explosives, Pyrotechnics, 1987
- Burning Rate Measurement of Solid Propellants by Means of Photo-TransistersThe Journal of the Society of Chemical Industry, Japan, 1962