Abstract
The results of a kinetic study of the disproportionation reaction of carbon monoxide on the surface of B1–B3 palladium alloy membranes over wide ranges of residence times and temperatures are reported. The specific rates and activation energies of the reaction with the formation of CO2 and atomic carbon adsorbed on the surface were determined. It was found that the rate of reaction on all of the alloys from the B series other than B3-2 was independent of the consumption of CO and the residence time. The catalytic activity of multicomponent palladium alloy membranes in the CO disproportionation reaction was much lower and the activation energy was higher than the corresponding parameters of Pd-(6–10)Ru and Pd-5.5Ni binary alloy membranes. Atomic carbon formed in the reaction on all of the alloys from the B series other than the B3-2 alloy did not form carbon deposits as polymer films, pyrolytic carbon, or soot strongly bound to the surface of each other to result in a decrease in the rate of reaction. On the surface of the B3-2 alloy, atomic carbon initiated the formation of a polymer film weakly bound to the surface, which decreased the rate of reaction. A reaction mechanism was proposed to adequately describe the experimental results.