Impact of Waste‐Derived Slate Dust on Structural, Thermal, and Thermomechanical Behavior of Recycled Poly(Ethylene Terephthalate)
Open Access
- 30 July 2026
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 47 (20) , 18206-18221
Abstract
Recycled polyethylene terephthalate (rPET) is widely considered a sustainable alternative to virgin polyethylene terephthalate (PET). Nevertheless, its application in value‐added processes is frequently restricted due to property degradation occurring during recycling. This study investigates the use of slate dust (SD) as a reinforcing filler and its effects on the structural, thermal, and thermomechanical properties of rPET. Twin‐screw extrusion and injection molding were used to prepare composites with up to 20 wt% of SD. Gel permeation chromatography, Fourier transform infrared spectroscopy, and x‐ray diffraction confirmed that SD maintains chemical inertness during processing, with no detectable molecular degradation due to the filler. With a 20 wt% SD content, the thermal conductivity of rPET increased by approximately 41%, from 0.267 to 0.377 W/mK. Additionally, the crystallization temperature increased by 5°C, indicating the filler's nucleating effect. Dynamic mechanical analysis (DMA) indicates a ~39% increase in storage modulus at room temperature. To further explore the filler‐matrix interaction, Cole‐Cole plots and C‐factor, reinforcement efficiency, degree of entanglement, and adhesion‐related factors (A and B factors) were calculated from the DMA results. This study promotes waste valorization strategies by using slate waste as a filler and enhancing rPET to develop recycled polymer composites aligned with circular economy principles.Keywords
This publication has 60 references indexed in Scilit:
- Advances in Structural Separation Technologies for Multilayer Packaging RecyclingAdvanced Sustainable Systems, 2026
- Performance analysis of recycled PET composites reinforced with waste slate dust: physicomechanical and wear propertiesPolymer International, 2025
- Thermal Conductivity of Glass Dust Filled Epoxy Composite: A Numerical and Experimental StudyPolymer Composites, 2025
- Development and characterization of composites produced from recycled polyethylene terephthalate and waste marble dustPolymer Composites, 2022
- Impact of Graphite on Thermomechanical, Mechanical, Thermal, Electrical Properties, and Thermal Conductivity of HDPE/Copper CompositesFuel Cells, 2020
- Processing and wear response study of glass‐polyester composites with waste marble dust as particulate fillerPolymer Composites, 2020
- Effect of plasma treatment on mechanical and thermal properties of marble powder/epoxy compositesPolymer Composites, 2016
- Effect of ammonium polyphosphate and fillers on flame retardant and mechanical properties of recycled PET injection moldedPolymers for Advanced Technologies, 2015
- Investigation on mechanical and thermo‐mechanical properties of granite powder filled treated jute fiber reinforced epoxy compositePolymer Composites, 2015
- Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester compositesPolymer Composites, 2010