Abstract
The hybrid modular multilevel converter (Hybrid-MMC) integrates half-bridge and full-bridge sub-modules (HBSMs and FBSMs) to improve operational flexibility in high voltage direct current (HVDC) applications. Owing to this hybrid configuration, the converter can withstand wide DC-side (DCS) voltage variations, ranging from nominal levels to DC short-circuit fault (DC-SCF) conditions. By incorporating approximately 50% FBSMs, the Hybrid-MMC can block DC-SCFs, sustain reactive power exchange, and operate under reduced DCS voltage conditions. However, under DC-SCF conditions, excessive DCS and arm currents, along with overvoltages across FBSM capacitors, may arise. Such conditions can overstress semiconductor devices and capacitors in submodule (SM) devices and pose a risk to DCS equipment. To enhance transient fault ride-through (FRT) capability, this article proposes a hybrid modulated model predictive control (HM2PC) strategy based on a three-phase Hybrid-MMC model (TP-HM2PC). The proposed method reduces DCS fault current by about 12.5%, arm overcurrents by 20%, and fault clearing time by 3% compared with the per-phase HM2PC (PP-HM2PC) approach. In addition, a systematic closed-loop second-harmonic circulating current injection (SCL-SHCC) method is introduced to mitigate capacitor voltage instability under overmodulation conditions. The combination of TP-HM2PC and SCL-SHCC ensures stable converter operation even under severe overmodulation, using only 25% of the FBSMs. The effectiveness of the proposed control methods is validated through comprehensive MATLAB/Simulink simulations. Furthermore, experimental tests are conducted on a five-level Hybrid-MMC prototype implemented on a ZYNQ-based hardware platform.