Effects of thermoplastic polyurethane on the properties of poly(lactic acid)/organo‐montmorillonite nanocomposites based on novel vane extruder
Authors:
- 17 October 2013
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 54 (10) , 2292-2300
Abstract
Polylactic acid (PLA)/organo‐montmorillonite (OMMT) nanocomposites toughened with thermoplastic polyurethane (TPU) were prepared by melt‐compounding on a novel vane extruder (VE), which generates global dynamic elongational flow. In this work, the mechanical properties of the PLA/TPU/OMMT nanocomposites were evaluated by tensile, flexural, and tensile tests. The wide‐angle X‐ray diffraction and transmission electron microscopy results show that PLA/TPU/OMMT nanocomposites had clear intercalation and/or exfoliation structures. Moreover, the particles morphology of nanocomposites with the addition of TPU was investigated using high‐resolution scanning electronic microscopy. The results indicate that the spherical TPU particles dispersed in the PLA matrix, and the uniformity decreased with increasing TPU content (≤30%). Interestingly, there existed abundant filaments among amount of TPU droplets in composites with 30 and 40 wt% TPU. Furthermore, the thermal properties of the nanocomposites were examined with differential scanning calorimeter and dynamic mechanical analysis. The elongation at break and impact strength of the PLA/OMMT nanocomposites were increased significantly after addition of TPU. Specially, Elongation at break increased by 30 times, and notched impact strength improved 15 times when TPU loading was 40 wt%, compared with the neat PLA. Overall, the modified PLA nanocomposites can have greater application as a biodegradable material with enhanced mechanical properties. POLYM. ENG. SCI., 54:2292–2300, 2014. © 2013 Society of Plastics EngineersKeywords
Funding Information
- Fundamental Research Funds for the Central Universities (2012ZM0047)
- Program for New Century Excellent Talents in University (NCET-11-0152)
- Pearl River Talent Fund for Young Sci-Tech Researchers of Guangzhou City (2011J2200058)
- 973 Program (2012CB025902)
- National Natural Science Foundation of China-Guangdong Joint Foundation Project (U1201242)
This publication has 40 references indexed in Scilit:
- A novel composite coupled hardness with flexibleness—polylactic acid toughen with thermoplastic polyurethaneJournal of Applied Polymer Science, 2011
- Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusionComposites Science and Technology, 2010
- Morphologies and mechanical properties of polylactide/thermoplastic polyurethane elastomer blendsJournal of Applied Polymer Science, 2010
- Microwave‐assisted preparation of polylactide/organomontmorillonite nanocomposites via in situ polymerizationJournal of Applied Polymer Science, 2009
- Micropatterning of Covalently Attached Biotin on Poly(lactic acid) Film SurfacesMacromolecular Bioscience, 2009
- Syndiotactic Polystyrene/Organoclay Nanocomposites: Synthesis via In Situ Coordination‐Insertion Polymerization and Preliminary CharacterizationMacromolecular Materials and Engineering, 2005
- Effects of interfacial adhesion on the rubber toughening of poly(vinyl chloride) Part 1. Impact testsPolymer, 2001
- Numerical solution of fiber suspension flow through a complex channelJournal of Non-Newtonian Fluid Mechanics, 1998
- Effect of morphology on the brittle ductile transition of polymer blends: 1. A new equation for correlating morphological parametersPolymer, 1997
- DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMSChemical Engineering Communications, 1982