Snap-Through of Unsymmetric Cross-Ply Laminates Using Piezoceramic Actuators
Authors:
- 1 December 2003
- journal article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 14 (12) , 795-814
Abstract
The paper discusses the concept of using a piezoceramic actuator bonded to one side of a two-layer unsymmetric cross ply [0/90] T laminate to provide the moments necessary to snap the laminate from one stable equilibrium shape to another. The results presented are considered an alternative to existing morphing concepts wherein actuators are used to elastically warp structures into a shape other than their natural and unique equilibrium shape. These existing concepts require the continuous application of power to maintain the warped shape. With the concept discussed here, the actuators are used only to change from one equilibrium shape to another, so continuous power is not needed. The paper discusses several phases of modeling, including bonding the actuator to the laminate and applying voltage to the actuator to effect the shape change, and experimental work. Two models are developed, a simple model and a more refined one. Both are based on the Rayleigh-Ritz technique and the use of energy and variational methods. The experimental phase of the study is discussed, particularly the measurement of the voltage level needed to snap the laminate. The voltage measurements are compared with predictions and the agreement between measurements and the predictions of the refined model are reasonable, both qualitatively and quantitatively. Suggestions for future activities are presented.Keywords
This publication has 17 references indexed in Scilit:
- Design of multistable composites for application in adaptive structuresComposites Science and Technology, 2002
- Snap-through of unsymmetric fiber-reinforced composite laminatesInternational Journal of Solids and Structures, 2002
- Thermally-induced deformation behavior of unsymmetric laminatesInternational Journal of Solids and Structures, 1998
- A Study on the Room-Temperature Curvature Shapes of Unsymmetric Laminates Including Slippage EffectsJournal of Composite Materials, 1998
- Thermally-Induced Shapes of Unsymmetric LaminatesJournal of Composite Materials, 1996
- THE RESPONSE OF UNSYMMETRIC LAMINATES TO SIMPLE APPLIED FORCESMechanics of Advanced Materials and Structures, 1996
- Cured Shape of Unsymmetric Laminates with Arbitrary Lay-Up AnglesJournal of Reinforced Plastics and Composites, 1992
- Effect of residual shear strain on the cured shape of unsymmetric cross-ply thin laminatesComposites Science and Technology, 1990
- Non-linear temperature-curvature relationships for unsymmetric graphite-epoxy laminatesInternational Journal of Solids and Structures, 1987
- The Room-Temperature Shapes of Four-Layer Unsymmetric Cross-Ply LaminatesJournal of Composite Materials, 1982