Qualitative SEM analysis of fracture surfaces for dental ceramics and polymers broken by flexural strength testing and crown compression
Open Access
- 22 February 2023
- journal article
- research article
- Published by Wiley in Journal of Prosthodontics
- Vol. 32 (5) , 100-110
Abstract
Purpose: To perform qualitative analysis using scanning electron microscopy (SEM) of fracture surfaces for ceramic and polymeric dental materials broken via standardized flexural and crunch‐the‐crown (CTC) tests.Materials and Methods: Zirconia, glass–ceramic, and polymeric (Trilor; TRI, Juvora; JUV, Pekkton; PEK) materials were loaded using crowns for CTC tests, discs (zirconia and glass–ceramics) for piston‐on‐3 ball tests, bars (polymer) for 3‐point bend tests, and bars (zirconia, glass–ceramics) for 4‐point bend tests. SEM was used to characterize the fracture surfaces and identify fracture surface features (e.g., origin, mist, hackle, and the direction of crack propagation [DCP]). Electron dispersive spectroscopy was used to identify the local chemistry.Results: Fracture surface features were found to be less visually apparent for glass–ceramics than zirconia. For zirconia bars, fractures originated roughly midway between the corner and center for processing defects related to sintering. Fractures originated at the bottom corners of glass–ceramic bars (void or surface flaw) and PEK bars (surface flaw). TRI bar failures exposed glassy fibers. Fracture features were generally less discernable for discs compared to bars for zirconia and glass–ceramics. Ceramic crowns fractured into 2 to 3 pieces, with fractures originating at the occlusal surface and clear evidence for the DCP. Failures of TRI and JUV specimens (bars and crowns) were less catastrophic than for the ceramics, with exposed fibers (TRI) and surface cracks (JUV). PEK crown and bar fractures presented dimple (ductile) features formed due to microvoid coalescence followed by brittle crack propagation.Conclusions: The critical flaws responsible for failure initiation were a function of material composition and test configuration. Fractographic analysis can reveal problems associated with the manufacturing of materials, their handling, grinding and finishing/polishing procedures, the structural design and choice of material, and the quality of the final laboratory‐delivered restoration.Keywords
This publication has 33 references indexed in Scilit:
- Impact of machining on the flexural fatigue strength of glass and polycrystalline CAD/CAM ceramicsDental Materials, 2017
- Monolithic zirconia dental crowns. Internal fit, margin quality, fracture mode and load at fractureDental Materials, 2017
- ADM guidance—Ceramics: guidance to the use of fractography in failure analysis of brittle materialsDental Materials, 2017
- Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramicsRegenerative Biomaterials, 2015
- Crown fracture: Failure load, stress distribution, and fractographic analysisThe Journal of Prosthetic Dentistry, 2015
- The Effects of Margin Curvature on Load at Fracture of Ceramic CrownsThe International Journal of Prosthodontics, 2015
- The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknessesDental Materials, 2014
- Fractographic analyses of all-ceramic crowns: A study of 27 clinically fractured crownsDental Materials, 2013
- In Vitro Study of Fracture Load and Fracture Pattern of Ceramic Crowns: A Finite Element and Fractography AnalysisJournal of Prosthodontics, 2011
- Qualitative and quantitative fracture analyses of high‐strength ceramicsEuropean Journal of Oral Sciences, 2009