What stator current processing-based technique to use for induction motor rotor faults diagnosis?
Authors:
- G.B. KlimanGKG.B. Kliman
Top Cited Papers
- 28 May 2003
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 18 (2) , 238-244
Abstract
In recent years, marked improvement has been achieved in the design and manufacture of stator winding. However, motors driven by solid-state inverters undergo severe voltage stresses due to rapid switch-on and switch-off of semiconductor switches. Also, induction motors are required to operate in highly corrosive and dusty environments. Requirements such as these have spurred the development of vastly improved insulation material and treatment processes. But cage rotor design has undergone little change. As a result, rotor failures now account for a larger percentage of total induction motor failures. Broken cage bars and bearing deterioration are now the main cause of rotor failures. Moreover, with advances in digital technology over the last years, adequate data processing capability is now available on cost-effective hardware platforms, to monitor motors for a variety of abnormalities on a real time basis in addition to the normal motor protection functions. Such multifunction monitors are now starting to displace the multiplicity of electromechanical devices commonly applied for many years. For such reasons, this paper is devoted to a comparison of signal processing-based techniques for the detection of broken bars and bearing deterioration in induction motors. Features of these techniques which are relevant to fault detection are presented. These features are then analyzed and compared to deduce the most appropriate technique for induction motor rotor fault detection.Keywords
This publication has 15 references indexed in Scilit:
- Squirrel-cage rotor options for AC induction motorsIEEE Transactions on Industry Applications, 2001
- A review of induction motors signature analysis as a medium for faults detectionIEEE Transactions on Industrial Electronics, 2000
- Induction motors' faults detection and localization using stator current advanced signal processing techniquesIEEE Transactions on Power Electronics, 1999
- Diagnostics of mechanical abnormalities in induction motors using instantaneous electric powerIEEE Transactions on Energy Conversion, 1999
- Evaluation and implementation of a system to eliminate arbitrary load effects in current-based monitoring of induction machinesIEEE Transactions on Industry Applications, 1997
- APPLICATION OF WAVELETS TO GEARBOX VIBRATION SIGNALS FOR FAULT DETECTIONJournal of Sound and Vibration, 1996
- Three phase induction machines asymmetrical faults identification using bispectrumIEEE Transactions on Energy Conversion, 1995
- Computer-aided detection of airgap eccentricity in operating three-phase induction motors by Park's vector approachIEEE Transactions on Industry Applications, 1993
- Methods of Motor Current Signature AnalysisElectric Machines & Power Systems, 1992
- Rotor Failures in Squirrel Cage Induction MotorsIEEE Transactions on Industry Applications, 1986