Synthesis, morphology, and viscoelastic properties of cyanate ester/polyhedral oligomeric silsesquioxane nanocomposites
- 18 July 2005
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 43 (17) , 3887-3898
Abstract
Cyanate ester (PT‐15, Lonza Corp) composites containing the inorganic–organic hybrid polyhedral oligomeric silsesquioxane (POSS) octaaminophenyl(T8)POSS [1; (C6H4NH2)8(SiO1.5)8] were synthesized. These PT‐15/POSS‐1 composites (99/1, 97/3, and 95/5 w/w) were characterized by X‐ray diffraction (XRD), transmission election microscopy (TEM), dynamic mechanical thermal analysis, solvent extraction, and Fourier transform infrared. The glass‐transition temperatures (Tg's) of the composite with 1 wt % 1 increased sharply versus the neat PT‐15, but 3 and 5 wt % 1 in these cyanate ester composites depressed Tg. All the PT‐15/POSS composites exhibited higher storage modulus (E′) values (temperature > Tg) than the parent resin, but these values decreased from 1 to 5 wt % POSS. The loss factor peak intensities decreased and their widths broadened upon the incorporation of POSS. XRD, TEM, and IR data were all consistent with the molecular dispersion of 1 due to the chemical bonding of the octaamino POSS‐1 macromer into the continuous cyanate ester network phase. The amino groups of 1 reacted with cyanate ester functions at lower temperatures than those at which cyanate ester curing by cyclotrimerization occurred. In contrast to 1, 3‐cyanopropylheptacyclopentyl(T8)POSS [2; (C5H9)7(SiO1.5)8CH2CH2CH2CN] had low solubility in PT‐15 and did not react with the resin below or at the cure temperature. Thus, phase‐separated aggregates of 2 were found in samples containing 1–10 wt % 2. Nevertheless, the Tg and E′ values (temperature > 285 °C) of these composites increased regularly with an increase in 2. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3887–3898, 2005Keywords
This publication has 68 references indexed in Scilit:
- Influence of phenyl-trisilanol polyhedral silsesquioxane on properties of epoxy network glassesPolymer, 2003
- Mechanical properties and structures of dicyanate–clay nanocompositesJournal of Applied Polymer Science, 2003
- Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical propertiesPolymer, 2003
- ABA triblock copolymers containing polyhedral oligomeric silsesquioxane pendant groups: synthesis and unique propertiesPolymer, 2003
- Mechanical properties of intercalated cyanate ester–layered silicate nanocompositesPolymer, 2003
- A promising conductive material: highly oriented polypropylene filled with short vapour-grown carbon fibresMaterials Letters, 2001
- Extrusion conditions and properties of vapor grown carbon fiber reinforced polypropylenePolymer Composites, 2001
- Mechanical, thermal and morphological properties of glass fiber and carbon fiber reinforced polyamide-6 and polyamide-6/clay nanocompositesMaterials Letters, 2001
- Polyhedral Oligomeric Silsesquioxanes: Building Blocks for Silsesquioxane-Based Polymers and Hybrid MaterialsComments on Inorganic Chemistry, 1995
- Cure kinetics of a thermosetting liquid dicyanate ester monomer/high‐Tg polycyanurate materialJournal of Applied Polymer Science, 1993