Acceleration factor study of lead-free solder joints under wide range thermal cycling conditions
Authors:
- 1 January 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 1816-1822
Abstract
In this study, a comprehensive set of tests were performed on test vehicles with different package types, sizes, pitches, and solder joints metallurgies. Accelerated Thermal Cycling (ATC) testing was performed using four different thermal cycling profiles: 0-100 °C, -40-125 °C, -55-125 °C, and -60-150 °C. Data from the tests were analyzed for failure mode and failure rate using Weibull statistics, and the characterized life for each test condition was determined and analyzed. The impact of solder alloy metallurgies, package types, sizes, and pitches on acceleration factors was also analyzed. The data will help quantify discrepancies due to test condition variations, and will also provide valuable guidance on effects of package types, size, pitches, and solder joints metallurgies. In addition, failure analysis was performed at different stages of the tests for each thermal cycling condition. The failure modes and failure mechanism were compared and discussed across all the thermal cycling profiles.Keywords
This publication has 4 references indexed in Scilit:
- Parametric acceleration transforms for lead-free solder joint reliability under thermal cycling conditions2009
- An acceleration model for lead-free (SAC) solder joint reliability under thermal cycling2008
- Acceleration Factors for Lead-Free Solder MaterialsIEEE Transactions on Components and Packaging Technologies, 2007
- The Influence of Elevated Temperature Aging on Reliability of Lead Free Solder Joints2007