Stress-Dependent Magnetic Equivalent Circuit for Modeling Welding Effects in Electrical Steel Laminations
Open Access
Abstract
Welding has a severe impact on the efficiency of electrical machines. The heat added during the welding process affects the microstructure of the material and causes residual stress. This results in local degradation of the magnetic permeability and facilitates additional iron losses in the machine core. With the purpose of modeling and simulating welding effects in electric machines, this paper proposes a stress-dependent magnetic equivalent circuit (MEC) model for welded non-grain-oriented electrical steel laminations. A modified iron loss model is proposed to accommodate these welding effects. Furthermore, the proposed MEC model is applied to a M270-35A stator core as a case study. It was demonstrated that the core losses increase by 25% when four welding joints are applied. With a limited number of magnetic measurements on a welded and unwelded core, the model can be fully parametrized. Finally, the model was successfully validated on a core with eight welding seams at 100 Hz. The proposed model can be integrated into the design of electric machines to consider the welding effects.Keywords
Funding Information
- Vlaio-NWO-project (IWT.150457)
This publication has 16 references indexed in Scilit:
- Modeling of Eddy-Current Losses of Welded Laminated Electrical SteelsIEEE Transactions on Industrial Electronics, 2016
- Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steelJournal of Magnetism and Magnetic Materials, 2016
- A novel approach of accurately evaluating residual stress and microstructure of welded electrical steelsNDT & E International, 2015
- Laser welding of electrical steel stacks investigation of the weldability2014
- Influence of the Welding Process on the Performance of Slotless PM Motors With SiFe and NiFe Stator LaminationsIEEE Transactions on Industry Applications, 2013
- The relation between the magnetostriction and the hysteresis losses in the non-oriented electrical steelsJournal of Magnetism and Magnetic Materials, 2004
- Loss separation and parameters for hysteresis modelling under compressive and tensile stressesJournal of Magnetism and Magnetic Materials, 2004
- Influence of welding and sticking of laminations on the magnetic properties of non-oriented electrical steelsJournal of Magnetism and Magnetic Materials, 2003
- Power losses and magnetization process in Fe–Si non-oriented steels under tensile and compressive stressJournal of Magnetism and Magnetic Materials, 2000
- General properties of power losses in soft ferromagnetic materialsIEEE Transactions on Magnetics, 1988