Integration of traditional systems and advanced oxidation process technologies for the industrial treatment of olive mill wastewaters
- 10 March 2016
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 37 (19) , 2524-2535
Abstract
A complete industrial treatment system (involving the integration of coagulation/flocculation and Fenton processes) to depurate real wastewaters coming from two-phase olive oil production mills has been studied. The experimental results indicated that at the end of this combined strategy, involving a primary physical separation stage followed by Fenton's chemical oxidation, chemical oxygen demand (COD) is reduced up to 90% and total polyphenols' concentration is decreased up to 92%. The treated stream biodegradability (BOD5/COD) reached 0.52 and the Total Suspended Solids (TSSs) and Total Dissolved Solids (TDSs) decreased up to 95% and 69%, respectively. Fenton's procedure was optimized bearing in mind the pH adjustment step, different procedures for hydrogen peroxide addition and the use of coagulants instead of the chemical precipitation (by raising pH) to promote iron sludge settling. Our results demonstrated that pH (3.0 ± 0.1) control during the oxidation reaction improves the oxidation efficiency. Moreover, the final NaOH addition is essential to a better sludge formation and consequent precipitation of the residual iron removing also some organic matter.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (IF/00215/2014,PTDC/EQU-ERQ/113308/2009,SFRH/BDE/33977/2009)
This publication has 28 references indexed in Scilit:
- A study on olive oil mill wastewater management in Turkey: A questionnaire and experimental approachResources, Conservation and Recycling, 2012
- Treatment of wastewaters from the green table olive packaging industry using electro-coagulationChemical Engineering Journal, 2011
- Olive Mill and Winery Wastewaters Pre-Treatment by Coagulation with ChitosanSeparation Science and Technology, 2010
- Olive mill wastewater evaporation management using PCA methodCase study of natural degradation in stabilization ponds (Sfax, Tunisia)Journal of Hazardous Materials, 2010
- An overview of the application of Fenton oxidation to industrial wastewaters treatmentJournal of Chemical Technology & Biotechnology, 2008
- Complete treatment of olive pomace leachate by coagulation, activated-carbon adsorption and electrochemical oxidationWater Research, 2008
- Effect of combined physico-chemical processes on the phytotoxicity of olive mill wastewatersWater Research, 2008
- A New Process for the Management of Olive Oil Mill Waste Water and Recovery of Natural AntioxidantsJournal of Agricultural and Food Chemistry, 2007
- Technologies for olive mill wastewater (OMW) treatment: a reviewJournal of Chemical Technology & Biotechnology, 2006
- Treatment of olive mill effluents by coagulation–flocculation–hydrogen peroxide oxidation and effect on phytotoxicityJournal of Hazardous Materials, 2006