Fatigue Performance of Rib-to-Deck Joints in Orthotropic Steel Decks with Thickened Edge U-Ribs
- 1 September 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 22 (9)
Abstract
This study evaluated the fatigue performance of rib-to-deck welded joints in orthotropic steel decks (OSDs) with thickened edge U-ribs (TEUs). Fatigue performance of four rib-to-deck specimens with TEUs was investigated and compared with those of three rib-to-deck specimens with conventional U-ribs. Overall, the use of TEUs enhanced the fatigue strength of rib-to-deck joints. Finite-element modeling was conducted and validated by experimental data and sensitivity analyses. The validated finite-element model was then used to investigate the mechanism for the enhancement of fatigue strengths caused by use of TEUs and to evaluate the effects of weld penetration and open angle of rib-to-deck joints. Findings show that use of TEUs significantly improved the robustness of welded joints in terms of sensitivity to variations in the weld penetration. Appropriate increases in the open angle of rib-to-deck joints in OSDs with TEUs further improved fatigue performances. Finally, two full-scale orthotropic steel deck specimens were tested to further validate the effectiveness of TEUs.Keywords
This publication has 20 references indexed in Scilit:
- Experiment on fatigue behavior of rib-to-deck weld root in orthotropic steel decksJournal of Constructional Steel Research, 2016
- Evaluation of Cracking in the Rib-to-Deck Welds of the Bronx–Whitestone BridgeJournal of Bridge Engineering, 2016
- Investigations on the effect of weld penetration on fatigue strength of rib-to-deck welded joints in orthotropic steel decksInternational Journal of Steel Structures, 2014
- Fatigue predictions of welded joints and the effective notch stress conceptInternational Journal of Fatigue, 2012
- IIW recommendations for the fatigue assessment of welded structures by notch stress analysis2012
- Fatigue of steel bridge infrastructureStructure and Infrastructure Engineering, 2011
- Stress Characteristics and Fatigue Crack Behaviour of the Longitudinal Rib-To-Cross Beam Joints in an Orthotropic Steel DeckAdvances in Structural Engineering, 2008
- Fatigue life estimates for a slender orthotropic steel deckJournal of Constructional Steel Research, 2008
- Fatigue crack initiation life prediction of railroad wheelsInternational Journal of Fatigue, 2006
- Fatigue assessment of welded joints by local approaches2006