Ultra-Low Crosstalk 125-μm-Cladding Four-Hole Four-Core Fibers Fabricated by the Over-Cladding Bundled Rods Method
Authors:
- Saki NozoeSNSaki Nozoe
- Shinichi AozasaSAShinichi Aozasa
- Kazuhiko AikawaKAKazuhiko Aikawa
- Masaharu OhashiMOMasaharu Ohashi
- Kazuhide NakajimaKNKazuhide Nakajima
- Ryohei FukumotoRFRyohei Fukumoto
- Yoshimichi AmmaYAYoshimichi Amma
- Taiji SakamotoTSTaiji Sakamoto
- Takashi MatsuiTMTakashi Matsui
- Katsuhiro TakenagaKTKatsuhiro Takenaga
- Yoshiteru AbeYAYoshiteru Abe
- Kyozo TsujikawaKTKyozo Tsujikawa
- 15 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 37 (21) , 5600-5608
Abstract
We realized a four-core fiber with 125 μm-cladding and four-holes using a novel fabrication technique, namely the over-cladding bundled rods (OBR) method. Four air holes were successfully introduced by using the OBR method without the need for a drilling process, and this enabled a 10 dB/km improvement in the crosstalk characteristic. As a result, we realized four-core fibers with a 125 μm cladding diameter and operating in both the single mode and 2 linear polarized (LP) modes in the C+L band were realized while maintaining an inter-core crosstalk of less than -30 dB/100km. The OBR method is a promising technique for effectively realizing an multi-core fiber with ultra-low crosstalk and a high spatial density.Keywords
Funding Information
- NICT
This publication has 15 references indexed in Scilit:
- 118.5 Tbit/s transmission over 316 km-long multi-core fiber with standard cladding diameter2017
- Low Crosstalk 125 µm-Cladding Multi-Core Fiber with Limited Air-Holes Fabricated with Over-Cladding Bundled Rods Technique2017
- Design of 125 μm cladding multi-core fiber with full-band compatibility to conventional single-mode fiber2015
- Ultra-large number of transmission channels in space division multiplexing using few-mode multi-core fiber with optimized air-hole-assisted double-cladding structure.Optics Express, 2014
- Physical‐contact‐type fan‐out device for multicore fibreElectronics Letters, 2013
- Low-loss and broadband PLC-type mode (de)multiplexer for mode-division multiplexing transmission2013
- Crosstalk Suppressed Hole-assisted 6-core Fiber with Cladding Diameter of 125 µm2013
- Possibility of Stack and Draw process as Fabrication Technology for Multi-Core Fiber2013
- A large effective area multi-core fiber with an optimized cladding thicknessOptics Express, 2011
- Multi-core fiber design and analysis: coupled-mode theory and coupled-power theoryOptics Express, 2011