A comparison of the effect of riveting and cold expansion on the strain distribution and fatigue performance of fiber metal laminates
Authors:
- 23 August 2013
- journal article
- research article
- Published by SAGE Publications in The Journal of Strain Analysis for Engineering Design
- Vol. 49 (3) , 141-153
Abstract
Fatigue tests carried out on three configurations (unexpanded, cold expanded and riveted) of fiber metal laminate material clearly demonstrated the beneficial effect of riveting compared to cold expansion in zero load transfer joints, for an approximately equivalent level of interference. Digital image correlation was used to measure the in-plane surface strain on cold expanded and riveted coupons during fatigue loading, and for the first time, digital image correlation was combined with pressure sensitive films to measure the strains resulting from the application of the rivet, including those under the rivet head. A comparison of the resultant strain field showed that the application of a rivet significantly reduces the stress concentration at the central hole and is effective in extending fatigue life. Some rivet heads were removed by milling, and the results from subsequent fatigue tests were used together with closed-form calculations to explain the findings of this study. It was concluded that the beneficial effect of riveting was less as a result of interference hole filling on the part of the rivet shank, but more a combination of the effect of interference and compression through the joint thickness.Keywords
This publication has 13 references indexed in Scilit:
- Fractographic examination of coupons representing aircraft structural joints with and without hole cold expansionEngineering Failure Analysis, 2013
- The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap jointsInternational Journal of Fatigue, 2007
- High-speed digital image correlation: error estimations and applicationsOptical Engineering, 2007
- Residual stresses in and around electromagnetically installed rivets measured using synchrotron and neutron diffractionJournal of Neutron Research, 2007
- Relaxation of Residual Stresses in and around Mechanical Fasteners Due to Fatigue LoadingMaterials Science Forum, 2006
- Avoiding knife‐edge countersinks in GLARE through dimplingFatigue & Fracture of Engineering Materials & Structures, 2005
- The effect of interference‐fit fasteners on the fatigue life of central hole specimensFatigue & Fracture of Engineering Materials & Structures, 2005
- AN OVERVIEW OF OBTAINING QUANTITATIVE PRESSURE DISTRIBUTIONS AND LOADS FROM PRESSURE-SENSITIVE FILMSExperimental Techniques, 2002
- IMAGE-AVERAGING IN THE ANALYSIS OF DATA FROM PRESSURE-SENSITIVE FILMExperimental Techniques, 1997
- Retardation of cracks emanating from fastener holesEngineering Fracture Mechanics, 1974