Penetration of the Flame Into the Top-Land Crevice - Large-Eddy Simulation and Experimental High-Speed Visualization
- 1 September 2015
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Flame penetration into the top-land crevice of a combustion engine's cylinder is investigated by large-eddy simulation (LES) and high-speed visualization experiments. This penetration is of practical relevance as it leads to the formation of unburned hydrocarbons (UHC) wherever the flame is quenched inside the crevice. In optically accessible engines, the crevice is particularly large, so that it must be considered in simulations, which also creates an opportunity to study flame penetration in detail. The high-speed imaging shows a luminous front, subject to cyclical variation, penetrating into the top-land crevice, but cannot distinguish between a flame burning into the crevice or just being pushed into it by increasing pressure in the cylinder. The LES of the process permits to turn off the reaction source term, so that the effect of convection and free flame propagation can be separated. The simulation shows qualitative agreement for the case where the reaction continues inside the crevice, giving further evidence for the need of detailed wall and combustion modeling inside the crevice.Keywords
This publication has 40 references indexed in Scilit:
- Heat transfer and crevice flow in a hydrogen-fueled spark-ignition engine: Effect on the engine performance and NO exhaust emissionsInternational Journal of Hydrogen Energy, 2013
- LES study of cycle-to-cycle variations in a spark ignition engineProceedings of the Combustion Institute, 2011
- Large Eddy Simulation of a Motored Single-Cylinder Piston Engine: Numerical Strategies and ValidationFlow, Turbulence and Combustion, 2010
- Flame/Wall Interactions: Laminar Study of Unburnt HC FormationFlow, Turbulence and Combustion, 2010
- Computational combustionProceedings of the Combustion Institute, 2005
- Application of a flame-wrinkling les combustion model to a turbulent mixing layerSymposium (International) on Combustion, 1998
- An experimental study on quenching crevice widths in the combustion chamber of a spark-ignition engineSymposium (International) on Combustion, 1996
- The Sources of Unburnt Hydrocarbon Emissions from Spark Ignition Engines during Cold Starts and Warm-UpProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1994
- GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONSMonthly Weather Review, 1963
- Flame quenching at the walls of an internal combustion engineSymposium (International) on Combustion, 1957