Environmental Compatibility of Lightweight Aggregates from Mine Tailings and Industrial Byproducts
Open Access
Abstract
A lightweight aggregate was produced by sintering the mixture of gold mine tailings, red mud, and limestone at 1150 °C. The physical (i.e., skid resistance, abrasion resistance, and bond strength) and environmental (i.e., leachability) feasibility of this aggregate was assessed to consider its potential use as a construction material for bicycle lanes. The skid resistance (British pendulum number of 71) and bond strength (1.5 N·mm−2) of the aggregate were found to be appropriate for this use. However, the abrasion loss value of the aggregate was found to be 290 mg, which exceeds the limit of Korean Standard KS F 281 (200 mg). Heavy metals were found to not leach from the aggregate in various leaching tests. These include Korean (Korea Standard Method for Solid Waste), American (Toxic Characteristic Leaching Procedure (TCLP), Synthetic Precipitation Leaching Procedure (SPLP)), and European (BS EN 12457-1) leaching tests, despite the raw materials containing significant amounts of Pb, As, and F. However, leachate extracted from the aggregate exhibited an aquatic toxicity to Daphnia magna of 13.94 TU24hr and 14.25 TU48hr, most likely due to a high pH and Ca concentration originating from the free CaO present in the aggregate. The data suggests that the physical properties of the reconstructed aggregate are appropriate for use in bicycle lane construction, however the dissolution of Ca and the pH level of the leachate need to be controlled to protect aquatic ecosystems.Keywords
Funding Information
- Basic Research Project (16-3241) of the Korea Institute of Geoscience and Mineral Resources (KIGAM) funded by the Ministry of Science, ICT and Future Planning of Korea (16-3241)
This publication has 31 references indexed in Scilit:
- Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ashJournal of Cleaner Production, 2016
- Bauxite residue (red mud) as a pulverised fuel ash substitute in the manufacture of lightweight aggregateJournal of Cleaner Production, 2016
- Bauxite residue issues: II. options for residue utilizationHydrometallurgy, 2011
- Production of synthetic lightweight aggregate using reservoir sediments for concrete and masonryCement and Concrete Composites, 2011
- Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregateConstruction and Building Materials, 2010
- Preventing catastrophic failures and mitigating environmental impacts of tailings storage facilitiesProcedia Earth and Planetary Science, 2009
- Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill: Application to mine Doyon, Quebec, CanadaMinerals Engineering, 2008
- Development and tests of lightweight aggregate using sewage sludge for nonstructural concreteConstruction and Building Materials, 2007
- Leachability of metals from sludge-based artificial lightweight aggregateJournal of Hazardous Materials, 2007
- Environmental impact from the use of recycled materials in road construction: method for decision-making in NorwayResources, Conservation and Recycling, 2004