Effect of exfoliation on poly(styrene‐co‐acrylonitrile)/montmorillonite nanocomposite flammability
Authors:
- 24 January 2005
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 16 (2-3) , 239-248
Abstract
Montmorillonite clays (MMT) have shown potential as non‐halogenated fire retardants in polymer blends, but the effect of morphology of the resulting nanocomposite is not well understood. In this article MMT blends are studied in a styrene‐acrylonitrile copolymer (SAN) matrix to get structure–property relationships relating to the more complex problem of flame retardancy (FR) of acrylonitrile‐butadiene‐styrene copolymer (ABS) computer housings. The morphology observed in SAN/MMT blends using twin screw extrusion was complex, and was affected by the compatibilizing amine head group substituent size, the amine tail group length, and the amine exchange ratio. However, the morphology did not affect flammability properties significantly. The most important determinant of FR properties was clay loading. Peak heat release rate was reduced up to 49% at a loading of about 12% organoclay, using a 2‐ethylhexyl dimethyl hydrogenated tallow ammonium surfactant. Backside temperatures were measured during FR tests, and significant reductions in maximum heat soak temperature and time to reach heat soak temperature were noted as exfoliation increased, supporting the theory that the clays have an insulative effect. Copyright © 2005 John Wiley & Sons, Ltd.Keywords
This publication has 23 references indexed in Scilit:
- Flammability and thermal stability studies of ABS/Montmorillonite nanocompositePolymer International, 2003
- Preparation and thermal properties of ABS/montmorillonite nanocompositePolymer Degradation and Stability, 2002
- Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocompositesPolymer, 2001
- A new hybrid nanocomposite prepared by emulsion copolymerization of ABS in the presence of clayJournal of Polymer Science Part B: Polymer Physics, 2001
- Effects of acrylonitrile content on the properties of clay-dispersed poly(styrene-co-acrylonitrile) copolymer nanocompositePolymer Bulletin, 2000
- Flammability Properties of Polymer−Layered-Silicate Nanocomposites. Polypropylene and Polystyrene NanocompositesChemistry of Materials, 2000
- Please Dispose of ProperlyScientific American, 2000
- Flammability of polymer clay nanocomposites consortium:2000
- Synthesis and properties of new poly(dimethylsiloxane) nanocompositesChemistry of Materials, 1995
- Heat release rate: The single most important variable in fire hazardFire Safety Journal, 1992