Comparative Study of Screen-Printed Electrodes Modified with Graphene Oxides Reduced by a Constant Current
- 30 July 2015
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 162 (10) , B282-B290
Abstract
A comparative study of several screen-printed electrodes modified with electrochemically reduced graphene oxides (ERGO) by means of a constant current has been carried out. The ERGOs were produced from graphene oxides (GO) with different controlled functional groups contents and locations. The experimental reduction conditions were optimized for each particular GO to generate ERGO-modified electrodes with the aim of improving the performance of the dopamine redox process. The ERGO-modified electrodes exhibited a larger electroactive area, a higher reversibility of the redox process, faster kinetics, and greater double-layer capacitance. Analysis of the reduction degree and residual functional groups by means of X-ray photoelectron spectroscopy (XPS) after and before reduction enabled us to determine the relation between the electrochemical behavior and morphology of the electrodes. A hydrazine-reduced graphene oxide showed the best analytical performance with a higher sensitivity (0.259 μA/μM vs. 0.090 μA/μM in the case of a bare electrode), and a linear range from 1–100 μM. It was found that both the experimental reduction conditions and starting graphene material are critical for obtaining a modified electrode with a suitable electrochemical behavior and properties and that a constant current is a suitable technique for the reduction of graphene oxides, especially for screen-printed electrodes.Keywords
This publication has 45 references indexed in Scilit:
- Simultaneous determination of ascorbic acid, dopamine and uric acid using high-performance screen-printed graphene electrodeBiosensors and Bioelectronics, 2012
- Recent advances in graphene-based biosensorsBiosensors and Bioelectronics, 2011
- Nanohybrid Materials as Transducer Surfaces for Electrochemical Sensing ApplicationsElectroanalysis, 2010
- Graphene for electrochemical sensing and biosensingTrAC Trends in Analytical Chemistry, 2010
- Highly Sensitive and Selective Determination of Dopamine Based on Graphite Nanosheet‐Nafion Composite Film Modified ElectrodeElectroanalysis, 2010
- In situ electrochemical generation of gold nanostructured screen-printed carbon electrodes. Application to the detection of lead underpotential depositionElectrochimica Acta, 2009
- Catalytic Oxidation of Dopamine at a Nickel Hexacyanoferrate Surface Modified Graphite Wax Composite Electrode Coated with NafionElectroanalysis, 2009
- Lead Sensor Using Gold Nanostructured Screen‐Printed Carbon Electrodes as TransducersElectroanalysis, 2009
- Catalyst‐Free Efficient Growth, Orientation and Biosensing Properties of Multilayer Graphene Nanoflake Films with Sharp Edge PlanesAdvanced Functional Materials, 2008
- Preparation of Graphitic OxideJournal of the American Chemical Society, 1958