Microslip friction in flat belt drives
Authors:
- 1 October 2005
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 219 (10) , 1097-1106
Abstract
The microslip shear model of belt mechanics is extended to fully incorporate belt inertia effects and used to analyse the steady state of a two-pulley drive. The belt is modelled as an axially moving string consisting of a tension-bearing member and a pliable elastomer envelope. Relative displacement between the tension-bearing member and the pulley surfaces shears the elastomer envelope, transferring the friction from the pulley surface to the tension-bearing member. The belt-pulley contact arcs consist of adhesion and sliding zones. Static friction exists in the adhesion zones, whereas kinetic friction exists in the sliding zones. An iteration method involving one outer and two inner loops is proposed to find the steady mechanics, including the sliding and adhesion zones, belt-pulley friction, and belt tension distribution. The outer loop iterates on the tight span tension similar to that used in published creep models. Two inner loops iterate on the tight span and driven pulley speeds respectively, necessitated by the speed differences between the tension-bearing member and the pulley at the entry points in the shear theory. Comparisons between the shear and creep models are conducted. Dramatic differences in belt-pulley mechanics between these two models are highlighted. Nevertheless, the key system performance measures such as the belt tight/slack span tensions, the maximum transmissible moment, and efficiency differ only modestly for the most normal operating conditions. Correspondingly, the adoption of the creep model for flat belts in industry is well justified because it is well developed and simple, although the shear model seems more relevant for modern belts with grid layers.Keywords
This publication has 10 references indexed in Scilit:
- Steady Mechanics of Belt-Pulley SystemsJournal of Applied Mechanics, 2005
- On a Perturbation Method for the Analysis of Unsteady Belt-Drive OperationJournal of Applied Mechanics, 2004
- Mechanics of Serpentine Belt Drives with Tensioner Assemblies and Belt Bending StiffnessJournal of Mechanical Design, 2004
- An Exact Solution for Steady Motion of an Extensible Belt in Multipulley Belt Drive SystemsJournal of Mechanical Design, 2000
- The Stretching and Slipping of Belts and Fibers on PulleysJournal of Applied Mechanics, 1999
- Belt Slip—A Unified ApproachJournal of Mechanical Design, 1996
- The influence of microslip on vibratory response, part I: A new microslip modelJournal of Sound and Vibration, 1986
- Contact Mechanics1985
- Chain and Belt Drives - A ReviewThe Shock and Vibration Digest, 1981
- Mechanics of the belt driveInternational Journal of Mechanical Sciences, 1970