Fault Location Method Based on Single-End Measurements for Underground Cables
Authors:
- 10 October 2011
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 26 (4) , 2845-2854
Abstract
The fault location in underground cables is characterized as the technical difficulties due to complexities in cables. Based on the direct circuit analysis, a fault location algorithm for underground cables with no laterals is presented in this paper. The single-end phasor measurements, including the voltages and currents sampled in the substation side, are utilized to locate the single phase faults in the typical single-conductor cross-linked polyethylene (XLPE) cables rated at the medium voltage (MV) levels. The distinctive cable characteristics are considered, such as relatively large capacitance, effects of sheaths and sheath bonding methods. The different fault scenarios are taken into account as well. The effect of changes of cable parameters and application of static response load model are also investigated. The simulation studies demonstrate the proposed algorithm can achieve the high accuracy under various system and fault conditions.Keywords
This publication has 21 references indexed in Scilit:
- An accurate fault locator for underground distribution networks using modified apparent-impedance calculation2010
- Fault location for underground distribution feeders: An extended impedance-based formulation with capacitive current compensationInternational Journal of Electrical Power & Energy Systems, 2009
- Fault Location for Underground Power Cable Using Distributed Parameter ApproachIEEE Transactions on Power Systems, 2008
- Traveling-Wave-Based Fault-Location Scheme for Multiend-Aged Underground Cable SystemIEEE Transactions on Power Delivery, 2006
- Protection of High-Voltage AC Cables2006
- Fault location method for distribution networks using 37-buses distributed parameter line model2004
- Accurate fault location and protection scheme for power cable using fault generated high frequency voltage transients2002
- Improved GPS travelling wave fault locator for power cables by using wavelet analysisInternational Journal of Electrical Power & Energy Systems, 2001
- Fault location method for MV cable network2001
- Protective relaying considerations for transmission lines with high voltage AC cablesIEEE Transactions on Power Delivery, 1997