Effect of Initial Oxide Layer on Ignition and Combustion of Boron Powder
- 7 November 2013
- journal article
- research article
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 39 (2) , 185-191
Abstract
Only few data exist for experimental studies on ignition and combustion of boron particles with initial oxide thickness. The oxidation, ignition and combustion characteristics including the onset temperatures, weight gain, apparent activation energy, emission spectra during combustion, and ignition delay time of crystalline boron powders with different initial oxide thickness (x0) were studied by a laser ignition and thermogravimetric (TG) analyses. Simulations of the kinetics of oxide layer during boron ignition were conducted using a common model. The results indicated that the onset temperature was approximately 775 °C, independent of x0. The total weight gain decreased with increasing x0, whereas the weight gain at 775 °C did not change. The apparent activation energy was found to be insensitive to x0 and had a constant value of about 210 kJ mol−1. The intensity of the emission spectra gradually decreased while the ignition delay time increased with increasing x0. Numerical simulation showed that the removal rate of oxide layer enhanced with increasing x0. The experimental results revealed that the oxidation of boron powder was no diffusion‐controlled process at low temperatures. But the diffusion of oxygen could become important to the oxidation reaction at high temperaturesKeywords
Funding Information
- National Natural Science Foundation of China (51106135)
- Research Fund for the China Postdoctoral Science Foundation (20110491769)
- Fundamental Research Funds for the Central Universities (2012FZA4014)
This publication has 19 references indexed in Scilit:
- Improved Method for the Determination of Kinetic Parameters from Non-isothermal Thermogravimetric Analysis (TGA) DataEnergy & Fuels, 2010
- Studies on the ignition behaviour of boron powderThermochimica Acta, 2010
- Oxide-Free, Catalyst-Coated, Fuel-Soluble, Air-Stable Boron Nanopowder as Combined Combustion Catalyst and High Energy Density FuelEnergy & Fuels, 2009
- Combustion characteristics of boron nanoparticlesCombustion and Flame, 2009
- Ignition and combustion of boron particles in fluorine-containing environmentsCombustion and Flame, 2001
- Boron suboxides measured during ignition and combustion of boron in shocked Ar/F/O2 and Ar/N2/O2 mixturesCombustion and Flame, 2000
- Multi-phase model for ignition and combustion of boron particlesCombustion and Flame, 1999
- Ignition and combustion of boron particlesProgress in Energy and Combustion Science, 1996
- Kinetic modeling and sensitivity analysis for B/H/O/C/F combination systemsCombustion and Flame, 1995
- Combustion of boron powders through bunsen flameAIAA Journal, 1985