Contribution of High Mechanical Fatigue to Gas Turbine Blade Lifetime during Steady-State Operation
Open Access
Abstract
In this study, the contribution of high thermomechanical fatigue to the gas turbine lifetime during a steady-state operation is evaluated for the first time. An evolution of the roughness on the surface between the thermal barrier coating and bond coating is addressed to elucidate the correlation between operating conditions and the degradation of a gas turbine. Specifically, three factors affecting coating failure are characterized, namely isothermal operation, low-cycle fatigue, and high thermomechanical fatigue, using laboratory experiments and actual service-exposed blades in a power plant. The results indicate that, although isothermal heat exposure during a steady-state operation contributes to creep, it does not contribute to failure caused by coating fatigue. Low-cycle fatigue during a transient operation cannot fully describe the evolution of the roughness between the thermal barrier coating and the bond coating of the gas turbine. High thermomechanical fatigue during a steady-state operation plays a critical role in coating failure because the temperature of hot gas pass components fluctuates up to 140 °C at high operating temperatures. Hence, high thermomechanical fatigue must be accounted for to accurately predict the remaining useful lifetime of a gas turbine because the current method of predicting the remaining useful lifetime only accounts for creep during a steady-state operation and for low-cycle fatigue during a transient operation.Keywords
Funding Information
- National Research Foundation of Korea (2017R1D1A1B03032746)
This publication has 28 references indexed in Scilit:
- Modelling Thermal Conductivity of Porous Thermal Barrier CoatingsCoatings, 2019
- Nondestructive Interface Morphology Characterization of Thermal Barrier Coatings Using Terahertz Time-Domain SpectroscopyCoatings, 2019
- Effects of Splat Interfaces, Monoclinic Phase and Grain Boundaries on the Thermal Conductivity of Plasma Sprayed Yttria-Stabilized Zirconia CoatingsCoatings, 2019
- Oxidation Simulation of Thermal Barrier Coatings with Actual Microstructures Considering Strength Difference Property and Creep-Plastic BehaviorCoatings, 2018
- Capturing the Competing Influence of Thermal and Mechanical Loads on the Strain of Turbine Blade Coatings via High Energy X-raysCoatings, 2018
- The Temperature Distribution in Plasma-Sprayed Thermal-Barrier Coatings During Crack Propagation and CoalescenceCoatings, 2018
- Effect of Particle In-Flight Behavior on the Microstructure and Fracture Toughness of YSZ TBCs Prepared by Plasma SprayingCoatings, 2018
- Metallurgical Considerations for Life Assessment and the Safe Refurbishment and Requalification of Gas Turbine BladesJournal of Engineering for Gas Turbines and Power, 2002
- Advanced gas turbine cycles for power generation: a critical reviewApplied Thermal Engineering, 1998
- High temperature coatings for gas turbine blades: A reviewSurface and Coatings Technology, 1989